Paradyne 6212 manual Nat, Static NAT Mapping

Page 54

5.7NAT

The NAT menu in the Advanced menu bar lets you set up Static NAT Mapping and Port Range Mapping.

5.7.1 Static NAT Mapping

Static NAT Mapping allows a pool of local IP addresses to share a public IP address. It is a form of NAT that maps multiple Private IP addresses to a single Public IP address. It allows several virtually addressed workstations to share a single global address. PAT uses the TCP and UDP port numbers to map multiple virtual addresses to a single global address.

Follow the steps below to configure the Static NAT Mapping:

STEP 1: Click on the Static Nat Mapping tab on the NAT menu.

STEP 2: Click on Add to add a new entry of the static Nat mapping. Fill out the following fields and click on Apply.

STEP 3: The new entry will be listed in previous Static NAT Mapping list.

54

July 2004

6212-A2-GB20-20

Image 54
Contents Hotwire 6212 Adsl Router CE Marking Important Safety Instructions CE Marking FCC Part 15 Declaration 6212-A2-GB20-20 July Canada EMI Notice Table of Contents Performance monitoring Glossary Chapter Introduction Product OverviewFeatures NAT/PATApplication Front Panel LED Indicators LAN 1xHardware Installation InstallationInstalling the USB Driver Auto Installation Page Manual Installation Page Page Page Page Page July 6212-A2-GB20-20 Uninstalling the USB Driver Auto-UninstallationPage Manual Removal of the Driver Login Via the Web Browser IP AddressLogin Procedure Basic Configuration Software Version InformationChange the Password Adsl Link Status Standards are MULTI, T1.413, G.DMT, and G.LITEWAN Setup RFC 1483 Bridged RFC 1483 RoutedPPPoE LAN IP Address PPPoA5 MER Enable RIP RoutingStatic route configuration Add ModifyDelete Reboot SaveRetrieve default settings Advanced Configuration Adsl ModeVlan DhcpParameters and buttons Enable Dhcp Page Disable the Dhcp Dhcp RelaySnmp Modifying Snmp ParametersModifying Traps Modifying Communities Firewall View Firewall Actions IP Filtering 6212-A2-GB20-20 July NAT Static NAT MappingPort Range Mapping Configure Configure Interface InterfacesParameters Page DNS & Default Gateway Domain Name user-defined3 NAT VCC List IPoADelete Encapsulation Add a VCCService Type July 6212-A2-GB20-20 Delete a VCC Show VCC qualityPPPoA Igmp Add an Igmp entryBridging Delete an Igmp entryBridge Page Spanning tree View STP parameters To configure STP parameters Enable/Disable STPPerformance monitoring System Statistics Interface StatisticsFollowing information is displayed TCP-IP ATM statistics DHCP-Lease1 AAL5 Encapsulation Chapter Diagnostics OAM LoopbackPing 6212-A2-GB20-20 July Firmware Upgrade Tftp Upgrade Via WebUpgrade Via FTP Example C\UpgradeExample put firmware app Accessing the Logging Record Log Record from TelnetPage Log Record From FTP Example get logfile adsl.extJuly 6212-A2-GB20-20 Appendix a Specifications Routing functions Power supplyDimensions Security FunctionsPin Assignments of the RJ11 Port LAN Port RJ45 Appendix B Pin AssignmentsLine port RJ11 Pin assignments of the LAN PortAppendix C Troubleshooting Event Checking Procedure or possible causeGlossary Page Page Page Page Page Page 100 101 102