Chapter 9 Accessing the Logging Record
The router allows accessing the log record in ASCII text format with the following information:
•A timestamp of each log entry
•Information about the following: PPP Authentication, PPP Negotiation, PPPoE Events, IPCP Configuration, TCP/IP Configuration.
The logging record can be accessed from a Telnet or FTP session. Both methods are discussed below.
9.1Log Record from Telnet
To access the logging record from Telnet, complete the following steps.
1. Click on the Windows Start button, then click on Run on the windows start menu.
2.Enter the command telnet followed by the IP address of your router. If the default LAN IP address was not changed, use the IP address 192.168.1.1. (Note: the PC and router must be on the same subnet.)
July 2004 | 85 |