Paradyne 3700-A2-GB20-10 manual Snmp Traps Overview, Device Traps

Management Information Bases

SNMP Traps Overview

COMSPHERE 6700 NMS alerts may be exported to authorized SNMP managers as SNMP traps. Traps are forwarded for any event that makes it through the COMSPHERE 6700 Series NMS's alert filter.

All traps are enterprise specific, with an OBJECT IDENTIFIER specifying the COMSPHERE 6700 Enterprise Device product.

Trap forwarding can be turned on/off for each SNMP manager in the authorized manager list through the COMSPHERE 6700 Series NMS Network Configuration feature or via SNMP. To do so, refer to the COMSPHERE 6700 Series Network Management System Network Configuration Guide.

Refer to Appendix C for a full description of the COMSPHERE 6700 Enterprise Traps.

Device Traps

Device traps are generated for device-related alert conditions detected by the COMSPHERE 6700 Series NMS.

The Enterprise OBJECT IDENTIFIER used in device traps is the following:

iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) att-2(74) att-products(1) paradyneNMS-products(13) nms6700-products(2) devOid(2)

The community name used in device product traps is the Device Read Community. This is formed by concatenating base read community with the device name.

The following COMSPHERE 6700 Device MIB variable bindings are included in each trap message.

Device Name (devAdminName)

Device Type (devAdminModelType)

System Time (nmsSystemTime)

Table 3-2identifies which primary alert traps apply to the specific devices. Trap numbers 1±32 are reserved for primary alerts.

Issue 2 December 1996 3-7