MIB Definition
::= { nmsTestEntry 6 }
±±
±±Test Status
nmsTestStatus
idle(1),
testMode(2),
testRunning(3),
testAborted(4),
testFailed(5)
}
ACCESS
DESCRIPTION ºTest status.
Status of idle(1) indicates that the device is not in test mode (from this control point); this is the initial value after createRequest. Status of testMode(2) indicates that the device is in a test mode (such as loopback); no further test results are pending. Status of testRunning(3) means the device is in test mode (such as bert test) and test results are pending. Status of testAborted(4) indicates that the device test was aborted and the device is no longer in test mode. Status of testFailed(5) indicates that the test has failed. Reason for test failure may be: invalid test parameter; device locked by another user; conflict with device environment, features, or configuration; device failure.º
::= { nmsTestEntry 7 }
±±Test Results
±±Local Total Seconds
nmsTestLocalTotalSecondsValidity
ACCESS
DESCRIPTION
ºValidity of the nmsTestLocalTotalSeconds test result object.º ::= { nmsTestEntry 8 }