Quatech RS-232 user manual ISL4245EIR

Page 36

9 Specifications

Bus interface:	PCI, 32-bit bus, Universal Voltage
Signaling	IBM-compatible computers
	IBM-compatible computers
Dimensions:	approx. 5.0" x 2.5"
Serial ports Controller:	16750-compatible with 64-byte FIFOs
Interface:	One female 68-pin VHDCI connector to:
Eight male D-9 connectors using adapter cable
	-or-
Eight female 10-pin RJ-45 connectors using
adapter cable
Transceivers:	ISL4245EIR
	High-level output: +5V min
	Low-level output: -5V max,
	Switching speed
Power requirements:	+5 volts; approx. 150 mA
Temperature:	operating 0° to 70° / storage -50°
to 80°
Humidity:	10% to 90%

ESC(LP)-100 User's Manual

30

Image 36

Contents ESCLP-100 Warranty Information Iii Declaration of Conformity Changing Resource Settings with Device Manager Base Address and Interrupt Level IRQEnhanced Serial Adapter Identification Page General Information Hardware Configuration Hardware Installation Port Address Range Enabling the Special Registers Interrupt Status RegisterOptions Register Bit Name DescriptionClock Rate Multiplier RR1 RR0Windows Configurations Windows MillenniumWindows Windows Page Using the New Hardware Found Wizard Page Viewing Resources with Device Manager Page Page ESCLP-100 Eight-Port RS-232 Serial Adapter Page Page Page Page Page Windows NT OS/2DOS and other operating systems Page QTPCI.EXE QTPCI.EXE Expert Mode display External Connections RS-232 INTA# ISL4245EIR Page Computer will not boot up ESCLP-100 Revision December