3Hardware Installation
1.Turn off the power of the computer system in which the
2.Remove the system cover according to the instructions provided by the computer manufacturer.
3.Install the
4.Replace the system cover according to the instructions provided by the computer manufacturer.
5.Attach and secure the cable connectors to the desired equipment.
6.Turn on the power of the computer system.
Figure 1: ESC(LP)-100 board outline
The output of the ESC(LP)-100 is a 68-pin VHDCI connector. A choice of cables is provided to convert the VHDCI into either eight standard male D-9 connectors or eight 10-pin RJ-45 connectors with all control signals provided to each port (RTS, DTR, CTS, DSR, DCD, and RI).
3 |