Quatech DSCLP-100 user manual Windows

Page 16

5.2Windows 2000

1.After inserting a DSCLP-100 for the first time, the "Add New Hardware Wizard will appear at start up. Click the "OK" button.

2.The following dialog box insert the Quatech COM CD (shipped with the device).

Click the "OK" button.

4.The following dialog box will display the appropriate INF file on the CD in drive. Click the "OK" button.

5.Window will copy the INF file from the CD and display a final dialog indication that the process is complete. Click the "Finish" button.

DSCLP/SSCLP-100 User's Manual

11

Image 16

Contents DSCLP/SSCLP-100 Page Date of Purchase Model Number Declaration of Conformity Table of Contents General Information Hardware Configuration Factory Default ConfigurationEnable Scratchpad Register SPAD, J2 Force High-Speed Uart Clock X2 or X4, J4-J5Clock multiplier jumper options Hardware Installation Jumper/connector locationsThis page intentionally blank Address Map and Special Registers Base Address and Interrupt Level IRQEnabling the Special Registers Interrupt Status RegisterOptions Register Enhanced Serial Adapter IdentificationClock Rate Multiplier RR1 RR0Windows Configurations Windows MillenniumWindows Windows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page Other Operating Systems Windows NTOS/2 DOS and other operating systemsQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal PCI Resource Map INTA#Specifications ICL3245CAPage Troubleshooting Computer will not boot upSSCLP/DSCLP-100