Quatech DSCLP-100 user manual Viewing Resources with Device Manager

Page 19

2.Select the radio button for "Driver from disk provided by hardware manufacturer." Click the "OK" button to continue.

3.An "Install From Disk" dialog box should pop up. Insert the diskette with the Quatech INF files on it, select the correct drive letter, and click the "OK" button. Windows 95 automatically browses the root directory for an INF file that defines configurations for Multi-function Adapters. If no INF files are found, click the "Browse" button and search the Win95 sub directory on the installation diskette. You are not required to select the file name. After finding the directory containing the INF files, Windows 95 will choose the correct file.

4.The "New Hardware Found" dialog box will appear again, this time for an "Unknown Device."

5.Again select the radio button for "Driver from disk provided by hardware manufacturer." Click the "OK" button to continue.

6.Another "Install From Disk" dialog box will pop up. The path should already be pointing to the Quatech diskette. Click the "OK" button to continue.

7.You should now see the "Copying Files" dialog box as Windows 95 copies the driver files from the diskette.

8.The installation utility will ask for your Windows 95 installation disks. Serial communication ports require two drivers supplied by Microsoft to function: SERIAL.VXD and SERIALUI.DLL. Insert the disk or CD and click "OK".

NOTE:

You may be able to skip this step if you are certain that your system has the latest version of these files installed. If you do not have your Windows 95 install disks immediately available, click "OK" anyway. A dialog box appears with an option to Skip the files. Click the Skip button and the files will not be installed. This is all right if the latest version of these drivers are currently in the \WINDOWS\SYSTEM directory.

9.The "New Hardware Found" dialog will repeat for each of the serial ports on the DSCLP-100 as each port is registered with Windows 95.

10.Installation is complete.

5.6Viewing Resources with Device Manager

14

DSCLP/SSCLP-100 User's Manual

Page 18 Page 20
Image 19
Page 18 Page 20
Contents DSCLP/SSCLP-100 Page Date of Purchase Model Number Declaration of Conformity Table of Contents General Information Force High-Speed Uart Clock X2 or X4, J4-J5 Hardware ConfigurationFactory Default Configuration Enable Scratchpad Register SPAD, J2Clock multiplier jumper options Jumper/connector locations Hardware InstallationThis page intentionally blank Base Address and Interrupt Level IRQ Address Map and Special RegistersInterrupt Status Register Enabling the Special RegistersEnhanced Serial Adapter Identification Options RegisterRR1 RR0 Clock Rate MultiplierWindows Millennium Windows ConfigurationsWindows Windows Windows Using the New Hardware Found Wizard Viewing Resources with Device Manager Page Page Page DOS and other operating systems Other Operating SystemsWindows NT OS/2QTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display External Connections RS-232 Port Signal INTA# PCI Resource MapICL3245CA SpecificationsPage Computer will not boot up TroubleshootingSSCLP/DSCLP-100
Top Page Image Contents