Patton electronic 2158 user manual Warranty Information, Radio and TV Interference, CE Notice

Page 4

1.0 WARRANTY INFORMATION

Patton Electronics warrants all CopperLink Ethernet Extender compo- nents to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of the ship- ment.

This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not performs as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics spe- cifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.

Note Conformity documents of all Patton products can be viewed online at www.patton.com under the appropriate product page.

1.1 RADIO AND TV INTERFERENCE

The CopperLink Ethernet Extender generates and uses radio frequency energy, and if not installed and used properly-that is, in strict accordance with the manufacturer’s instructions-may cause interference to radio and television reception. The CopperLink Ethernet Extender has been tested and found to comply with the limits for a Class A computing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection from such interfer- ence in a commercial installation. However, there is no guarantee that interference will not occur in a particular installation. If the CopperLink Ethernet Extender does cause interference to radio or television recep- tion, which can be determined by disconnecting the unit, the user is encouraged to try to correct the interference by one or more of the follow- ing measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equip- ment into a different AC outlet (such that the computing equipment and receiver are on different branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). A Cer- tificate of Compliance is available by contacting Technical Support.

4

Image 4
Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM CopperLink Series Interface Pin AssignmentRadio and TV Interference Warranty InformationCE Notice Service Tel +1 301 Email support@patton.comGeneral Information FeaturesDescription Typical application Installation Standalone Unit InstallationRack Card Installation CopperLink Ethernet Extender rack cardsConnecting the TWISTED-PAIR Line Interface Connecting the 10/100BASE-T Ethernet Interface CopperLink Ethernet Extender twisted pair line interfaceConnecting the 10/100Base-T Ethernet Port to a Hub Connecting the 10/100Base-T Ethernet Port to a PC DTEConnecting Power 10/100Base-T DTEPage Configuration Model 2168 only Configuring the Hardware DIP SwitchesModel 2168 standalone modem DIP switch orientation Configuring DIP Switch S1 Switch S1-1 Ethernet Auto SenseS1-1 Setting Switches S1-2 and S1-4 Data RateS1-2 S1-3 S1-4 Asymmetric Line Rates DS/US S1-5 S1-6 S1-7 S1-8 Reserved for future useOperation Power UPFront Panel LED Status Monitors Description LEDLED is solid yellow and the CopperLink Link LED Port. The more error corrections, the more often LED Status Indicators Power SupplyAppendix a LAN ConnectionDimensions Temperature RangeHumidity Appendix B Patton Model # DescriptionAppendix C Appendix D 10/100BASE-T InterfaceRJ-45 Copperlink InterfaceSymm Line Rate DS/US Distance in feet km Appendix EAsymm Line Rate DS/US Distance in feet km Page Copyright Patton Electronics Company All Rights Reserved