Patton electronic 1095 user manual Service, Tel Email support@patton.com, Features, Description

Page 3

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at:

tel: 301-975-1007

email: support@patton.com

www:http://www.patton.com

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 1095. Technical Service hours: 8AM to 5PM EST, Monday through Friday.

IMPORTANT: The Model 1095 is equipped with flash upgrade. Please refer to Patton website, or contact Technical Support for the latest version of the software.

3

2.0 GENERAL INFORMATION

Thank you for purchasing this Patton Electronics product. If ques- tions or problems arise during installation or use of this product, please do not contact Patton Electronics Technical Support at (301) 975-1007.

2.1 FEATURES

DSL Distances on just two wires using mDSL technology

DTE Speeds from 64 kbps to 2.3 Mbps

NetLink Plug-and-Play Master or Slave

Standalone (QuikConnect™) and Rackmount Versions Available

SNMP Network Management with In-Band Management of Remote Units plus Advanced Diagnostics & Statistics using Patton Model 1000MC

Internal, external or receive recovered clocking options

LED indicators for TD, RD, CTS, CD, DTR, TM, ER and NS

2.2 DESCRIPTION

The Patton Electronics NetLinkTM Model 1095 mDSL Multi-Rate DSL Modem provides high speed 2-wire connectivity to ISPs, PTTs, and corporations using mDSL (Multi-rate Digital Subscriber Line) tech- nology. Multi-rate DSL offers the ability to deliver the maximum bit rate that a twisted pair line can accommodate. Supporting multiple line rates from 144kbps to 2.320Mbps, the NetLink provides “megabyte” speeds to leased line, LAN to LAN interconnection, and WAN access networks over 3.6 miles/5.8km (1.054Mbps on 24AWG/.5mm wire). The Model 1095 mDSL standalone allows DTE speeds from 64 kbps to 2.3 Mbps in increments of 64kbps. Features include loopback diagnostics, in-band SNMP/HTTP remote management capabilities using NetLink Plug-and- Play, and externally accessible configuration switches.

A high density 2U-high rack card version of the Model 1095 mDSL is also available. As a symmetric DSL NTU, the Model 1095 offers the same data rates in both directions over a single pair of voice-grade telephone lines using Carrierless Amplitude and Phase (CAP) modula- tion. Featuring replaceable DCE-DTE interface modules, the NetLink mDSL can be configured for a huge range of V.24/RS-232, V.35, RS- 422/530, G.703 and X.21 applications. The standard Model 1095 is powered by a 100/230 VAC (Universal) supply. The DC power supply option supports any DC input between 36–72 VDC. Using the NetLink Plug-and-Play feature, the standalone unit at the Customer Premise site will automatically configure itself to the DTE rate of the rack card at the Central Office. Other configuration parameters fall to the default state. This allows changes in the configuration to be handled from a single end of the link.

4

Image 3
Contents User Manual Section Radio and TV InterferenceCE Notice Description ServiceFeatures Tel Email support@patton.comConfiguration DIP Switch Set S2 Configuring the Hardware DIP SwitchesS3 Summary Table CO/CPConfiguring the Software Switches Option #1 DTE Rate VT100 Terminal ConfigurationSoftware Configuration Menu Main Menu ScreenOption #3 DTE Interface Type Option #2 Clock Mode Selection MenuOption #6 CO/CP Mode Exiting the Configuration ModeNetlink PLUG-AND-PLAY Connecting the Twisted Pair InterfaceConnecting the Serial Port Configuring the X.21 QuikConnect Module Connecting PowerConnecting to a DC Power Source CTS POWER-UPLED Status Monitors TD & RDPattern Gen/Det Restart ProcedureSymbol Indicators FramerLoops and Patterns Local LoopWith 511/511E Loop Remote Digital511/511E Loop withPatton Electronics Model Specifications Patton Electronics Model 1095 Interface PIN Assignment Patton Electronics Model # DescriptionDTE /DCE Configuration 34F Female ConnectorPin # Signal DB-15 Female ConnectorAppendix E LED Descriptions