DVD Menu Options
E n g l i s h
Basic Operations
1Press SETUP in the STOP mode to enter the Setup Menu.
2Press OK to enter the next level submenu or confirm your selection.
3Press 1 2 to enter the submenu or return to the previous menu.
4Press 34 to highlight the desired menu.
5Press SETUP to quit the setup menu. ➜ The settings will be stored in the player’s memory even if the player is switched off.
Program (not for Picture CD/MP3)
You can play the contents of the disc in the order you want by programming the tracks to be played. Up to 20 tracks can be stored.
1Press 34 to choose ‘Program’ in the General Setup Page.
2Press 2 to move the cursor to the submenu to choose INPUT MENU.
3Press OK or PROG on the remote to enter the program page.
General Setup menu
The options included in General Setup menu are: Disc Lock, Program, OSD Language and Screen Saver.
Follow the steps below:
- - GENERAL SETUP PAGE - -
DISC LOCK
PROGRAM
OSD LANGUAGE
SCREEN SAVER
1Press SETUP to enter the setup menu.
2Press 1 2 to select the General Setup icon.
3Press OK to confirm.
NOTE:
Some of the features in the DVD Menu Options are described in “Getting Started”.
30
Input your favourite track
1Use the numeric keypad
2Press 1 234 to move the cursor to the next position.
➜If the track number is more than ten, press T to open the next page and proceed with programming or,
➜Use 1 2 3 4 to highlight NEXT, then press OK.
3Repeat steps 1 - 2 to input another track number.
Remove a track
1Press 1 234 to move the cursor to the track you want to remove.
2Press OK or PLAY to remove this track from the program menu.
3139 115 22851
29/08/2003, 2:45 PM