Philips LX3600 warranty Sound and Volume Controls, Volume control

Sound and Volume Controls

E	Sound Control
ngli	IMPORTANT!
sh	For proper surround sound, make
	sure the speakers and subwoofer are
	connected (see page 11).

Selecting surround sound

●Press SURR to select : MULTI-channel or STEREO.

➜The availability of the various surround sound modes depends on the number of speakers used and the sound available on the disc.

➜The centre and surround speakers operate only when the DVD home cinema system is set to Multi-channel mode.

In DVD,

➜The available output modes for Multi- channel include: Dolby Digital, DTS (Digital Theatre Systems) Surround, Dolby Surround and Dolby Pro Logic II.

In music discs,AUX,TUNER,TV,

➜Select Multi-channel (Dolby Pro Logic II) or Stereo.

➜Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode.

However, mono (single channel sound) sources will not produce any sound from the surround speakers.

Helpful Hint:

–You are not able to select the surround sound mode if the system menu/menu bar is turned on.

40

001-046_LX36_17_Eng40

Selecting digital sound effects

Select a preset digital sound effects that matches your disc’s content or that optimizes the sound of the musical style you are playing.

●Press SOUND on the remote.

When playing movie discs or in TV mode, you can select :

CONCERT, DRAMA,ACTION or SCI-FI.

When playing music discs or while in TUNER or AUX mode, you can select : ROCK, DIGITAL, CLASSIC or JAZZ.

Volume control

●Adjust VOLUME control (or press VOL +/- on the remote) to increase or decrease the volume level.

➜ "VOL MIN" is the minimum volume level and “VOL MAX” is the maximum volume level.

To turn off the volume temporarily

●Press MUTE on the remote.

➜Playback will continue without sound and "MUTE" appears.

➜To restore the volume, press MUTE again or increase the volume level.

3139 115 22851

29/08/2003, 2:45 PM