Patton electronic 4900 Installing the IpChannel Bank, Location and mounting requirements

Page 28

SmartNode 4900 User Manual

3 • Hardware installation

 

 

Note When setting up your SmartNode you must consider cable-length limitations and potential electromagnetic interference (EMI) as defined by the applicable local and international regulations. Ensure that your site is properly prepared before beginning installation.

Location and mounting requirements

The SmartNode 4900 is intended to be placed on a desktop or similar sturdy, flat surface that offers easy access to the cables or be installed in a standard 19-inch rack chassis. Allow sufficient space at the rear of the chassis for cable connections. Additionally, you should consider the need to access the unit for future upgrades

and maintenance.

This completes the planning phase for installation. The next section begins the installation procedures.

Installing the IpChannel Bank

Unpacking the Model SN4900 series IpChannel Bank

Inspect the shipping carton for external damage. Note any damage before removing the container contents. Report any equipment damage to the shipping carrier immediately for claim purposes. Save all packing mate- rial in case you need to return an item to the factory for servicing.

The IpChannel Bank comes with the following items:

Model SN4900 Series IpChannel Bank Quick Start Guide

Model SN4900 Series IpChannel Bank

An RJ-45-to-RJ-45 cable for use with the console and Ethernet ports

A DB-9-to-RJ-45 (EIA-561) adapter for connecting a PC’s serial port to the IpChannel Bank console port

Rack mounting kit with rack ears and mounting hardware

Note Power cables are shipped separately from the Model SN4900 Series

IpChannel Bank

Note Contact Patton Electronics for the proper RJ-21X cable for the

FSX ports

IpChannel Bank chassis installation

Do the following:

1.If you have not done so already, remove the IpChannel Bank from its shipping container.

2.If you are installing the IpChannel Bank in a 19-inch rack, go to step 4. Otherwise, place the IpChannel Bank at the desired location.

3.Go to section “Connecting cables” on page 29

4.Install the rack mounting ears onto the IpChannel Bank using the mounting hardware provided.

5.Place the IpChannel Bank at the desired position in the rack.

Installing the IpChannel Bank

28

Image 28
Contents SmartNode Mailsupport@patton.com Summary Table of Contents Table of Contents LEDs status and monitoring Factory Configuration End User License Agreement List of Figures List of Tables Audience About this guideStructure Precautions Impaired functioningSafety when working with electricity Sonnel. Opening the SmartNode case will void the warrantyPreventing Electrostatic Discharge Damage General observationsTypographical conventions used in this document General conventionsChapter contents General informationSmartNode 4900 Series overview Model SN4932 IpChannel BankSmartNode 4900 Series detailed description Power LED SmartNode 4900 Series front panelSmartNode 4900 Series rear panels Model SN4932Reset button behavior ExpansionApplications overview Introduction Multiservice carrier access over leased linesSmartNode 4900 Series applications Enterprise FXS concentration and extension over IP and T1/E1 Bulk analog line extensionsHardware installation Planning the installation Installation checklist Site logNetwork diagram Configuration toolsAC Power Mains Network informationInstalling the IpChannel Bank IpChannel Bank chassis installationLocation and mounting requirements Unpacking the Model SN4900 series IpChannel BankConnecting the FXS ports Connecting cablesConnecting the FXO ports Connecting the Ethernet ports RJ-45 Jack Signal NameConnecting the serial port Pin DescriptionConnecting power Grounding the Model SN4900-AC and DC unitsInstalling the power cables-AC units Grounding stud and power cable retainer clipInstalling the power cables-DC units DC connector, -DC and +DC input viewHardware installation Getting started with SmartNode 4900 Series Connecting the SmartNode to your laptop PC Configure IP address Factory-default IP settingsConnect to the RS-232 console port HyperTermLogin Changing the WAN IP addressConnecting the SmartNode to the network Loading the configuration optionalBootloader Start BootloaderStart-up with factory configuration Load a new application image SmartWare via TftpCopy tftp//tftpserveraddress/server path/b1 flash Additional information Load a new application image SmartWare via the serial linkLEDs status and monitoring Status LEDs Contacting Patton for assistance Warranty coverage Contact informationOut-of-warranty service Returns for creditReturn for credit policy RMA numbersAppendix a Compliance information Compliance Radio and TV interference FCC PartCE Declaration of Conformity Authorized European RepresentativeWatchfield Swindon, Wilts SN6 8TD, UK FCC Part 68 Acta Statement FXO ports Industry Canada Notice FXO PortsAppendix B Specifications Voice connectivity FXS Voice connectivity FXOEthernet interface Console portVoice processing signaling dependent FXS portsFXO ports PPP and Frame-Relay supportIP services Voice signalingVoice routing-session router Dimensions Weight and power dissipationManagement Operating environmentPower supply Identification of the SmartNode devices via SnmpUniversal AC version DC versionAppendix C Port pin-outs Ethernet 10Base-T and 100Base-T port EIA-561 RJ-45 8-pin portSync Serial port Band marked color-codes for the 64-pin RJ-21X connector FXS and FXO portsBrown Black Violet Appendix D Factory Configuration Factory Configuration Appendix E End user license agreement End User License Agreement Termination Other licensesAppendix F Installation checklist Task Verified by Date Appendix G Accessories Description Part Number

4900 specifications

The Patton Electronic 4900 is a robust and innovative solution in the realm of telecommunications and data networking. Designed to meet the challenges of modern network demands, it combines reliability with advanced technological features that make it a preferred choice for businesses of all sizes.

One of the standout features of the Patton 4900 is its versatility in supporting various communication protocols. This unit is capable of functioning as a VoIP gateway, enabling seamless voice communication over Internet Protocol networks. Its ability to bridge different telecommunications networks simplifies integration tasks and enhances operational efficiency.

The Patton 4900 is equipped with a powerful digital signal processor (DSP) that facilitates high-quality voice and video transmission. This technology reduces latency and ensures crystal-clear communication, making it ideal for enterprises that depend on reliable voice connectivity. Additionally, the DSP allows for advanced echo cancellation and noise reduction, further enhancing voice clarity in various environmental conditions.

Security is a paramount concern in today's networking landscape, and the Patton 4900 addresses this with robust encryption capabilities. It supports various encryption protocols, ensuring that sensitive data remains protected during transmission. This makes it an excellent choice for organizations that handle confidential information.

With multiple interfaces, including analog and digital ports, the Patton 4900 offers flexibility when connecting to existing infrastructure. Organizations can easily transition from legacy systems to modern VoIP solutions without undergoing extensive overhauls of their current setup. This adaptability is crucial for businesses looking to upgrade their communication systems without disrupting ongoing operations.

Moreover, the device is designed for ease of use, featuring a user-friendly interface that simplifies configuration and management. Network administrators can quickly set up and monitor the unit, minimizing downtime and maximizing productivity.

The Patton Electronic 4900 is not only built for high performance, but it also boasts a rugged hardware design that ensures durability in various operating conditions. This reliability reduces the likelihood of equipment failure, thereby minimizing the total cost of ownership.

In summary, the Patton Electronic 4900 stands out in the telecommunications market due to its advanced features, including versatility in communication protocols, high-quality voice and video transmission, robust security measures, flexible interfaces, ease of use, and reliable hardware. These characteristics make it an exceptional choice for organizations seeking to enhance their communication capabilities while ensuring the integrity and security of their data.