Patton electronic user manual Connecting the Model 1053/A RS-232, Power Connection

Page 12

tive and is wired for a two-wire interface. The signal/pin relationships are shown in Figure 4.

Figure 4. Model 1053 twisted pair line interface

4.2 CONNECTING THE MODEL 1053/A (RS-232)

The Model 1053/A supports RS-232 serial port connections. This section describes how to connect the serial ports to your RS-232 equipment.

Connecting the Model 1053/A (RS-232) to a DTE Device

The Model 1053/A provides an RS-232 DCE (data circuit terminating equipment) interface on a DB-25 female connector. As a DCE, this inter- face is designed to connect to DTE equipment, such as a router. When connecting the RS-232 interface of the Model 1053/A to your DTE device, use an RS-232 straight-through cable (see Figure 5). Appendix C on page 18 describes pin assignments and signal sources for the Model 1053/A RS-232 interface. When purchasing or constructing an interface cable, use the pin diagrams in Appendix C as a guide.

Figure 5. Connecting the Model 1053/A to an RS-232 serial DTE

4.3 POWER CONNECTION

The Model 1053 (all versions) are available with Universal AC (100–240 VAC), 120 VAC, 230 VAC or -12, -24, or -48 VDC power options. This section describes these options.

12

Image 12
Contents User Manual Table of Contents Page Warranty Information FCC InformationCE Notice Service Tel 301 Mailsupport@patton.comFeatures General InformationDescription Configuration Configuring the Hardware DIP SwitchesConfiguring DIP Switch S1 Opening the Model 1053 caseS1-3 Setting S1-4 SettingS1-1 S1-2 Sync Data Rate Async. Data Rate Other Model 1053 for receive recover clock mode Configuring DIP switch S2S1-8 Installation Connecting the Twisted Pair InterfaceConnecting the Model 1053/A RS-232 Connecting the Model 1053/A RS-232 to a DTE DevicePower Connection Universal AC Power 100-240 VAC DC PowerPort at +1 301 975-1007, via our web site at For more informationPOWER-UP OperationLED Status Monitors LEDControl Signals LED Status IndicatorsConnectors PowerTemperature Range WeightAltitude HumidityAppendix B Model # DescriptionDB-25 Female Connector Pin # SignalAppendix C RS-232 InterfacePage Copyright Patton Electronics Company All Rights Reserved