Patton electronic 2173 Appendix a, LAN Connection, Transmission Line, LED Status Indicators

Page 16

APPENDIX A

SPECIFICATIONS

A.1 LAN CONNECTION

Two shielded RJ-45, 10/100Base-T, IEEE 802.3 Ethernet

CopperLINK Connection: Shielded RJ-45

A.2 TRANSMISSION LINE

Two-wire unconditioned twisted pair.

A.3 COPPERLINK LINE RATE AND COPPERLINK DISTANCE

Line Rate: 100/70 Mbps, upstream/downstream. Additional three line rates are available via DIP switch settings.

Distance: 4,250 ft (1.3 km) at 1 Mbps upstream/4 Mbps downstream

Note Distances depend on selected line rate and line conditions. See Appendix D on page 19 for details.

A.4 LED STATUS INDICATORS

Power (Green)

CopperLINK: Link (Green)

Ethernet: Link (Green) & Activity (Flashing Green)

Remote (Green)

Local (Green)

A.5 POWER SUPPLY

External AC and DC options:

AC: 120 VAC, 220 VAC, and UI (120–240 VAC)

DC: 12 VDC, 24 VDC and 48 VDC

Power consumption: 860mA at 5V

A.6 TEMPERATURE RANGE

0–40°C

A.7 HUMIDITY

Up to 90% non-condensing.

A.8 DIMENSIONS

1.58H x 4.16W x 3.75D in. (10.6H x 4.1W x 8.8D cm)

16

Image 16
Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Regulatory Information Warranty InformationRadio and TV Interference FCC Part CE Declaration of Conformity ServiceAuthorized European Representative Safety When Working with Electricity Page General Information FeaturesDescription Installation Typical applicationConnecting the TWISTED-PAIR Line Interface ModelConnecting the 10/100BASE-T Ethernet Interface Model 2173 RJ-45 twisted pair line interfaceConfiguration Connecting PowerConfiguring the Hardware DIP Switches Front Configuring DIP Switch S1 Power UPCPE OFFFront Panel LED Status Monitors LEDLED Status Indicators Power SupplyTemperature Range DimensionsAppendix B Base Models10/100BASE-T Interface Appendix CCopperlink Interface Appendix D Copyright Patton Electronics Company All Rights Reserved

2173 specifications

The Patton Electronic 2173 is a versatile and robust digital communications device designed to enable seamless connectivity in a variety of networking environments. Known for its reliability and advanced feature set, the 2173 offers businesses a solution that enhances both performance and flexibility.

One of the standout features of the Patton 2173 is its support for multiple protocols. It is capable of functioning as a VoIP gateway, enabling voice over Internet Protocol services, while also supporting legacy analog phone systems. This dual capability allows organizations to bridge the gap between traditional telephony and modern IP-based communications, ensuring that businesses can migrate to new technologies without losing their existing investments.

In terms of connectivity, the Patton 2173 offers various interfaces, including FXS (Foreign Exchange Station) ports and FXO (Foreign Exchange Office) ports, which facilitate the integration of both analog and digital phones. This flexibility is particularly valuable for small to medium-sized businesses looking to optimize their communication infrastructure without extensive overhauls.

The device also incorporates advanced signal processing technology, which enhances voice quality by minimizing latency and jitter. This is crucial in ensuring clear and uninterrupted communication, especially in environments where high call traffic is managed. Moreover, the Patton 2173 supports echo cancellation and noise reduction features, further elevating voice clarity during calls.

User-friendliness is another integral aspect of the Patton 2173. With a web-based graphical interface, configuration and management are straightforward, even for those with limited technical expertise. This ease of use extends to its monitoring capabilities, where administrators can keep track of call performance and system health via an intuitive dashboard.

Security is a top concern in today’s digital communication landscape, and the Patton 2173 does not disappoint. It offers various security features, such as SRTP (Secure Real-Time Transport Protocol) and TLS (Transport Layer Security) encryption to safeguard voice data against potential threats.

The build quality of the Patton 2173 is industrial-grade, ensuring its longevity even in demanding environments. It is designed to support a variety of operating temperatures, making it suitable for deployment in diverse settings.

In summary, the Patton Electronic 2173 is a powerful communication device that combines flexibility, advanced technology, and user-friendly features, making it an ideal choice for organizations looking to enhance their voice communication systems while embracing modern networking solutions.