Patton electronic 2173 user manual

Page 7

WARNING

WARNING

In accordance with the requirements of council direc- tive 2002/96/EC on Waste of Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you sepa- rate this product from other waste and scrap and deliver to the WEEE collection system in your country for recy- cling.

This device is NOT intended nor approved for connec- tion to the PSTN. It is intended only for connection to customer premise equipment.

Electrostatic Discharge (ESD) can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled and can result in complete or intermittent failures. Do the fol- lowing to prevent ESD:

Always follow ESD prevention procedures when removing and replacing cards.

Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip to an unpainted surface of the chassis frame to safely chan- nel unwanted ESD voltages to ground.

To properly guard against ESD damage and shocks, the wrist strap and cord must operate effectively. If no wrist strap is available, ground yourself by touching the metal part of the chassis.

7

Image 7
Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Regulatory Information Warranty InformationRadio and TV Interference FCC Part CE Declaration of Conformity ServiceAuthorized European Representative Safety When Working with Electricity Page General Information FeaturesDescription Typical application InstallationModel Connecting the TWISTED-PAIR Line InterfaceModel 2173 RJ-45 twisted pair line interface Connecting the 10/100BASE-T Ethernet InterfaceConfiguration Connecting PowerConfiguring the Hardware DIP Switches Front OFF Configuring DIP Switch S1Power UP CPELED Front Panel LED Status MonitorsDimensions LED Status IndicatorsPower Supply Temperature RangeBase Models Appendix B10/100BASE-T Interface Appendix CCopperlink Interface Appendix D Copyright Patton Electronics Company All Rights Reserved

2173 specifications

The Patton Electronic 2173 is a versatile and robust digital communications device designed to enable seamless connectivity in a variety of networking environments. Known for its reliability and advanced feature set, the 2173 offers businesses a solution that enhances both performance and flexibility.

One of the standout features of the Patton 2173 is its support for multiple protocols. It is capable of functioning as a VoIP gateway, enabling voice over Internet Protocol services, while also supporting legacy analog phone systems. This dual capability allows organizations to bridge the gap between traditional telephony and modern IP-based communications, ensuring that businesses can migrate to new technologies without losing their existing investments.

In terms of connectivity, the Patton 2173 offers various interfaces, including FXS (Foreign Exchange Station) ports and FXO (Foreign Exchange Office) ports, which facilitate the integration of both analog and digital phones. This flexibility is particularly valuable for small to medium-sized businesses looking to optimize their communication infrastructure without extensive overhauls.

The device also incorporates advanced signal processing technology, which enhances voice quality by minimizing latency and jitter. This is crucial in ensuring clear and uninterrupted communication, especially in environments where high call traffic is managed. Moreover, the Patton 2173 supports echo cancellation and noise reduction features, further elevating voice clarity during calls.

User-friendliness is another integral aspect of the Patton 2173. With a web-based graphical interface, configuration and management are straightforward, even for those with limited technical expertise. This ease of use extends to its monitoring capabilities, where administrators can keep track of call performance and system health via an intuitive dashboard.

Security is a top concern in today’s digital communication landscape, and the Patton 2173 does not disappoint. It offers various security features, such as SRTP (Secure Real-Time Transport Protocol) and TLS (Transport Layer Security) encryption to safeguard voice data against potential threats.

The build quality of the Patton 2173 is industrial-grade, ensuring its longevity even in demanding environments. It is designed to support a variety of operating temperatures, making it suitable for deployment in diverse settings.

In summary, the Patton Electronic 2173 is a powerful communication device that combines flexibility, advanced technology, and user-friendly features, making it an ideal choice for organizations looking to enhance their voice communication systems while embracing modern networking solutions.