Patton electronic 2884 user manual Console, Connecting a serial terminal

OnSite Model 2884 User Manual C • Cabling

Introduction

This section provides information on the cables used to connect the OnSite and the interface cards to the exist- ing network infrastructure and to third party products.

Console

The OnSite can be connected to a serial terminal over its serial console port, as depicted in figure 12.

The interconnecting cables shall be acceptable for external use

and shall be rated for the proper application with respect to volt-

age, current, anticipated temperature, flammability, and

CAUTION mechanical serviceability.

Serial Terminal

Note A Patton Model 16F-561 RJ45 to DB-9 adapter is included with each IpLink 288x device

Figure 12. Connecting a serial terminal

Note See section “Console port” on page 47 for console port pin-outs.

Introduction 42