TP-Link TL-WPA2220, TL-WPA4220 manual Wireless Security

Page 24

TL-WPA4220/TL-WPA2220300Mbps AV500/AV200 WiFi Powerline Extender

WPA/WPA2 and WPA-PSK/WPA2-PSK. The default password can be found on the label at the bottom of the device. Wireless security can be configured on the following screen shown as Figure 3-10.

Figure 3-10 Wireless Security

¾Disable Security - Check this radio button to disable wireless security. If disabled, the wireless stations will be able to connect this device without encryption. It is strongly recommended that you choose one of the security types to enable security.

¾WEP - Select 802.11 WEP security.

Figure 3-11 WEP

•Type - You can select one of following types.

9Automatic - Select Shared Key or Open System authentication type automatically based on the wireless station's capability and request.

9Shared Key - Select 802.11 Shared Key authentication type.

9Open System - Select 802.11 Open System authentication type.

17

Image 24

Contents REV1.0.0 1910010839 Copyright & Trademarks FCC Statement CE Mark WarningSafety Information Declaration of Conformity Yang Hongliang Product Manager of International BusinessImportant Safety Instructions Contents Package Contents IntroductionSystem Requirement Conventions Hardware Connection Before You BeginLED Indicator LEDs Name Status IndicationConnecting to the Internet Physical InterfaceHardware Connection DescriptionConnecting the Computer Page Wi-Fi Clone Button for Super Range Extension Wi-Fi Clone StepsAfter Wi-Fi Clone Page Configure the Device LoginFor Wired Connection Management Utility For Wireless Connection Login WindowsStatus StatusWireless NetworkWireless menu Wireless SettingsWireless Security 10 Wireless Security ¾ WPA/WPA2 Select WPA/WPA2 based on Radius Server Wireless MAC Filtering To set up an entry, follow these instructions To modify or delete an existing entryWireless Advanced Wireless Statistics Powerline Network SettingsStation Settings Page Firmware Upgrade System ToolsTo upgrade the devices firmware, follow these instructions Factory Defaults Backup & RestoreReboot PasswordSystem Log Connecting to Wireless Network WindowsInput the network key and then click OK Windows Vista Input the network key and then click OK Windows XP Input the network security key and then click Next Page Setting Up a Powerline Network with the Pair Button Create a Powerline network using the Pair button：Join an existing Powerline Network Pair ButtonsReset Leave an existing Powerline NetworkAppendix a Troubleshooting Guide Power LED does not light upPowerline LED does not light up Ethernet LED does not light upAppendix B Specifications