TP-Link TL-WR941ND Wireless N Router, ¾ WPA /WPA2 - Enterprise - It’s based on Radius Server

Page 49

¾WPA /WPA2 – Enterprise - It’s based on Radius Server.

TL-WR941NDWireless N Router

¾Disable Security - If you do not want to use wireless security, select this check box, but it’s strongly recommended to choose one of the following modes to enable security.

¾WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a notice in red as show in Figure 4-17.

Figure 4-17

•Type - you can choose the type for the WEP security on the pull-down list. The default setting is Automatic, which can select Open System or Shared Key authentication type automatically based on the wireless station's capability and request.

•WEP Key Format - Hexadecimal and ASCII formats are provided. Hexadecimal format stands for any combination of hexadecimal digits (0-9,a-f,A-F) in the specified length. ASCII format stands for any combination of keyboard characters in the specified length.

•WEP Key- Select which of the four keys will be used and enter the matching WEP key that you create. Make sure these values are identical on all wireless stations in your network.

•Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption. "Disabled" means this WEP key entry is invalid.

64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 5 ASCII characters.

128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 13 ASCII characters.

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters.

)Note:

If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type.

¾WPA /WPA2 – Enterprise - It’s based on Radius Server.

•Version - you can choose the version of the WPA security on the pull-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA

-40-

Image 49

Contents Rev 1.1.0 TL-WR941ND Wireless N RouterFCC STATEMENT COPYRIGHT & TRADEMARKSCE Mark Warning FCC RF Radiation Exposure StatementNational restrictions CountryKorea Warning Statements Industry Canada StatementNCC Notice Page ETSI EN 300 328 DECLARATION OF CONFORMITYETSI EN 301 489-1 V1.8.12008& ETSI EN 301 489-17 EN 550222006 +A12007 EN 550241998+A12001+A22003 EN 61000-3-22006+A12009+A22009 ENPackage Contents CONTENTSChapter DHCP 4.15.2 TL-WR941ND Wireless N Router Package ContentsSimple Installation Flexible Access ControlChapter 1.Introduction 1.1 Overview of the Router1.3 Main Features 1.4.1 The Front Panel 1.4 Panel LayoutName Status1.4.2 The Rear Panel ¾ RESET2.2 Installation Environment Requirements Chapter 2.Connecting the Router2.3 Connecting the Router 2.1 System RequirementsFigure 2-1 Hardware Installation of the TL-WR941ND Wireless N Router 3.1 TCP/IP Configuration Chapter 3.Quick Installation GuideFigure 3-1 Success result of Ping command Please check the connection following these stepsFigure 3-2 Failure result of Ping command 1. Is the connection between your PC and the Router correct?3.2 Quick Installation Guide Figure 3-6 Choose WAN Connection Type Figure 3-5 Quick SetupFigure 3-8 Quick Setup - MAC Clone Figure 3-7 Quick Setup - PPPoEFigure 3-10 Quick Setup - Static IP Figure 3-9 Quick Setup - MAC CloneNote Dialog ¾ WPA/WPA2-Personal - Select WPA based on pre-shared passphrase 4.6 WirelessFigure 3-13 Quick Setup - Finish 4.1 Login Chapter 4.Configuring the Router4.2 Status Please refer to 3.2 Quick Installation Guide 4.3 Quick Setup4.4 QSS Figure 4-1 Router StatusMethod One I. By PBCMethod Two The QSS Configuration Screen of Wireless Adapter Method ThreeTL-WR941ND Wireless N Router II. By PIN Method Two Enter the PIN from my Router 4.5.1 WAN 4.5 Networkadded to the network Figure 4-5 WAN - Dynamic IP Figure 4-6 WAN - Static IP Figure 4-7 WAN - PPPoE Figure 4-8 PPPoE Advanced Settings NSW / ACT - nsw.bigpond.net.au QLD - qld.bigpond.net.au Figure 4-10 L2TP Settings Figure 4-11 PPTP Settings z Static IP - Connections which use static IP address assignment z Dynamic IP - Connections which use dynamic IP address assignment4.5.3 MAC Clone 4.5.2 LANFigure 4-12 LAN Figure 4-13 MAC Address Clone4.6.1 Wireless Settings 4.6 WirelessOnly the PC on your LAN can use the MAC Address Clone function Figure 4-15 Wireless Settings ¾ Mode - Select the desired mode. The default setting is 11bgn mixed 4.6.2 Wireless Security ¾ WPA /WPA2 - Enterprise - It’s based on Radius Server Encryption - You can select either Automatic, or TKIP or AES Figure 4-20 Wireless MAC address Filtering 4.6.3 Wireless MAC Filtering4. Click the Save button to save this entry to access for Filtering Rules 4.6.4 Wireless Advanced4.6.5 Wireless Statistics 4.7 DHCP 4.7.1 DHCP SettingsThis page will be refreshed automatically every 5 seconds ¾ Default Domain - Optional. Input the domain name of your network 4.7.3 Address Reservation 4.7.2 DHCP Clients ListTo Reserve IP addresses 4.8 ForwardingTo modify or delete an existing entry 4.8.1 Virtual Servers To set up a virtual server entryFigure 4-31 Add or Modify a Virtual Server Entry 4.8.2 Port TriggeringTo add a new rule, follow the steps below 3. Incoming Port Range cannot overlap each other 4.8.3 DMZTo assign a computer or server to be a DMZ server 4.8.4 UPnP4.9.1 Basic Security 4.9 Securityz z z Figure 4-37 Basic Security4.9.2 Advanced Security 4.9.3 Local Management Figure 4-39 Local Management 4.9.4 Remote ManagementFigure 4-40 Remote Management 4.10Parental ControlTo add a new entry, please follow the steps below 7. Click the Save button 4.11.1 Rule 4.11Access ControlFigure 4-45 Access Control Rule Management To add a new rule, please follow the steps belowFigure 4-46 Add or Modify Internet Access Control Entry Figure 4-47 Host Settings 4.11.2 HostFigure 4-49 Add or Modify a Host Entry Figure 4-48 Add or Modify a Host EntryFigure 4-50 Target Settings 4.11.3 TargetFigure 4-52 Add or Modify an Access Target Entry Figure 4-51 Add or Modify an Access Target EntryTo add a new schedule, follow the steps below 4.11.4 ScheduleFigure 4-54 Advanced Schedule Settings 4.12 Advanced RoutingFigure 4-55 Advanced Routing 4.12.1 Static Routing List Other configurations for the entriesTo add static routing entries 4.12.2 System Routing Table 4.13Bandwidth Control4.13.2 Rules List 4.13.1 Control Settings4.14.1 Binding Setting 4.14IP & MAC Binding SettingTo add/modify a Bandwidth Control rule, follow the steps below To modify or delete an existing entry, follow the steps below To add IP & MAC Binding entries, follow the steps belowTo find an existing entry, follow the steps below Figure 4-64 Binding SettingFigure 4-66 Find IP & MAC Binding Entry 4.14.2 ARP ListFigure 4-67 ARP List 4.15.1 Comexe.cn DDNS 4.15Dynamic DNS4.15.2 Dyndns.org DDNS To set up for DDNS, follow these instructionsFigure 4-69 Dyndns.org DDNS Settings 4.15.3 No-ip.com DDNSFigure 4-70 No-ip.com DDNS Settings 4.16System ToolsFigure 4-71 The System Tools menu To set time manually 4.16.1 Time SettingsTo set time automatically 4.16.2 DiagnosticTo set Daylight Saving 2. The time will be lost if the router is turned offFigure 4-73 Diagnostic Tools To upgrade the Routers firmware, follow these instructions below 4.16.3 Firmware Upgrade4.16.5 Backup & Restore 4.16.4 Factory Defaults4. The Router will reboot after the upgrading has been finished 4.16.6 Reboot 4.16.8 System Log 4.16.7 PasswordFigure 4-80 System Log Figure 4-81 Mail Account Settings Figure 4-82 Statistics 4.16.9 StatisticsTL-WR941ND Wireless N RouterStatistics Table 1. How do I configure the Router to access Internet by ADSL users? Appendix A FAQFigure A-3 MAC Clone 3. I want to use Netmeeting, what do I need to do?Figure A-4 Virtual Servers Figure A-6 DMZ Figure A-5 Add or Modify a Virtual server Entry4. I want to build a WEB Server on the LAN, what should I do? field of the Web browser 5. The wireless stations cannot connect to the Router1. Install TCP/IP component Appendix B Configuring the PCsNow you have two ways to configure the TCP/IP protocol below ¾ Setting IP address automaticallyshown in the Figure below Figure B-2Figure B-3 ¾ Setting IP address manuallyFigure B-4 Wireless Appendix C SpecificationsGeneral Environmental and PhysicalAppendix D Glossary identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name

Related manuals

Manual 76 pages 42.16 Kb