Note
•• You can enter more than one encryption key. In this case, NP2500 prompts you to select the default encryption key.
First-time setup:Wired connection with automatic IP address
This is how to navigate and select with the remote control:
•Press or to select a menu option.
•Press OK to confirm a selection.
•Press BACK to go back to the previous screen.
•Press HOME to go to the Home menu.
The alphanumeric buttons of the remote control are
•To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of
NP2500.
•To cycle through the alphanumeric characters that are available, press a button repeatedly.
•To delete the last character entry from the display, press CLEAR.
•To delete the whole last line entry from the display, press and hold
CLEAR.
The onscreen display guides you through the process of connecting NP2500 to your home network and the Internet. This section describes the typical wired setup with automatic IP address. You can also follow the onscreen prompts for advanced configurations that are not described in this manual.
1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of NP2500 and the Ethernet jack of the wired router.
2 Ensure that the wired router is turned on and has broadband Internet access.
3 Follow the steps in chapter
4 Select [Wired (Ethernet)] to start the network setup process.
»» NP2500 acquires the automatic IP address.
»» NP2500 shows the confirmation for the connection to the network.
»» NP2500 shows the prompt for the connection to the Internet.
5 Select [Yes] to connect to the Internet. »» NP2500 shows the confirmation for
the connection to the Internet.
First-time setup:Wired connection with static IP address
This is how to navigate and select with the remote control:
•Press or to select a menu option.
•Press OK to confirm a selection.
•Press BACK to go back to the previous screen.
•Press HOME to go to the Home menu.
The alphanumeric buttons of the remote control are
•To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of
NP2500.
•To cycle through the alphanumeric characters that are available, press a button repeatedly.
•To delete the last character entry from the display, press CLEAR.
•To delete the whole last line entry from the display, press and hold
CLEAR.
English
EN 15