Philips HK-0947-NP2500-FR user manual Wired connection with automatic IP address

Page 29

The onscreen display guides you through the process of connecting NP2500 to your home network and the Internet. This section describes the typical wireless setup with static IP address. You can also follow the onscreen prompts for advanced configurations that are not described in this manual.

1 Ensure that your network name and network password or encryption key are available.

2 Turn on your wireless access point or wireless router with broadband Internet access.

3 Turn on NP2500.

4 Press SETTINGS, to go to the Settings menu.

5 Select [Wireless (WiFi)] to start the network setup process.

•For wireless routers with Wi-Fi protection system (WPS) that supports push button configuration (PBC): On the router, press the WPS PBC push button to activate. On NP2500 press OK to confirm.)

•For wireless routers with Wi-Fi protection system (WPS) that supports a personal identification number (PIN): On NP2500 select WPS PIN, then enter the displayed PIN on the router.

•For other wireless routers:

»» NP2500 searches for networks.

1 Select your network from the list of found networks and confirm.

 

• Enter the encryption key (if required)

 

and confirm.

 

• NP2500 tries to acquire an

2

automatic IP address.

Press BACK

to enter your IP address

3

manually.

 

Enter your static IP address and confirm.

»» NP2500 shows the confirmation for the connection to the network.

»» NP2500 shows the prompt for the

 

 

connection to the Internet.

nglish

4 Select [Yes] to connect to the Internet.

»» NP2500 shows the confirmation for

E

the connection to the Internet.

 

 

 

Note

•• You can enter more than one encryption key. In this case, NP2500 prompts you to select the default encryption key.

Wired connection with automatic IP address

This is how to navigate and select with the remote control:

• Press or to select a menu option.

•Press OK to confirm a selection.

•Press BACK to go back to the previous screen.

•Press HOME to go to the Home menu.

The alphanumeric buttons of the remote control are multi-function buttons:

•To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of

NP2500.

•To cycle through the alphanumeric characters that are available, press a button repeatedly.

•To delete the last character entry from the display, press CLEAR.

•To delete the whole last line entry from the display, press and hold

CLEAR.

The onscreen display guides you through the process of connecting

NP2500 to your home network and the Internet. This section describes the typical wired setup with automatic IP address. You can also follow the onscreen prompts for

EN 27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents
Contact information Philips Consumer Lifestyle HK-0947-NP2500-FR 2008 Issued the certificateContents Cleaning Technical dataInformation for Europe Know these safety symbols SafetyHearing Safety Listen at a moderate volume Splashing water, rain or high humidityInformation about the use of batteries Battery disposal informationEnvironmental notices Cannot be disposed of with normal household waste Overview Your NP2500Rear view Top viewRate Remote controlVOL Page Position NP2500 Install remote control batteriesPrepare Connect sound system Connect AC powerConnect Status Eco standby You can select from the following status optionsFirst-time connection to home network First-time setupView the demo NP2500 shows the prompt for the connection to the Internet NP2500Clear Manually First-time setupWireless connection with static IP addressConnection to the Internet First-time setupWired connection with automatic IP address 16 EN Play Adjust volumeShuffle play Repeat playConfigure a PC to share music and pictures Install Media Browser softwareConfigure a MAC to share music and pictures Alphanumeric searchSuperScroll / Scroll at high speed Quick jump navigationAlphanumeric buttons of the remote Button once or more to select a characterSave Internet radio stations to presets Play preset Internet radio stationsInternet radio Listen to Internet radioManually add Internet radio stations Listen to Favorite StationsRemove a Favorite Station Home Listen to My Media Play mode Settings Sound settings Equalizer settingsDisplay settings Slideshow settingsClock settings Clicker soundNetwork settings Alarm settingsWireless connection with automatic IP address Wireless network connection with automatic IP addressWireless connection with static IP address Select Yes to connect to the Internet Wired connection with automatic IP address»» NP2500 shows the prompt for Connection to the Internet Wired connection with static IP address Control are multi-function buttons »» Press Back to go back to the previous screenNP2500 To cycle through the alphanumeric Display, press Clear To delete the whole last line entryInformation Check for SW upgradesUnregister NP2500 Registration informationRestore factory settings Demo modeCall center numbers Legal informationCleaning MaintenanceThis chapter tells you how to care for NP2500 Clean NP2500 only with a soft dry clothTechnical data Supported picture file formats Supplied accessoriesSupported audio file formats Possible reasons TroubleshootingAmplifier GlossaryCBR constant bit rate CD Compact DiscDhcp MHz Mega Hertz One million cycles per second Mono monaural M4APIN PBCWAV VBR variable bit rateWPS WPA / WPA2 Wi-Fi Protected AccessWMA Windows Media Audio Philips Contact informationStreamium terms and conditions Changes in Features Software END User License Agreement Page Page Credits GNU General Public License Page Page Page Page Page Page GNU Lesser General Public License Page Page Page Page Page Page USA Koninklijke Philips Electronics N.V
Top Page Image Contents