Philips HK-0947-NP2500-FR user manual Wireless connection with static IP address, Clear

Page 28

repeatedly until you see the number or alphabetic character in the display of NP2500.

•To cycle through the alphanumeric characters that are available, press a button repeatedly.

•To delete the last character entry from the display, press CLEAR.

•To delete the whole last line entry from the display, press and hold

CLEAR.

The onscreen display guides you through the process of connecting

NP2500 to your home network and the Internet. This section describes the typical wireless setup with automatic IP address. You can also follow the onscreen prompts for advanced configurations that are not described in this manual.

1Ensure that your network name and network password or encryption key are available.

2Turn on your wireless access point or wireless router with broadband Internet access.

3Turn on NP2500.

4Press SETTINGS, to go to the Settings menu.

5Select [Wireless (WiFi)] to start the network setup process.

•For wireless routers with Wi-Fi protection system (WPS) that supports push button configuration (PBC): On the router, press the WPS PBC push button to activate. On NP2500 press OK to confirm.)

•For wireless routers with Wi-Fi protection system (WPS) that supports a personal identification number (PIN): On NP2500 select WPS PIN, then enter the displayed PIN on the router.

•For other wireless routers:

»» NP2500 searches for networks.

1 Select your network from the list of found networks and confirm.

• Enter the encryption key (if required) and confirm.

• NP2500 acquires the automatic IP address.

• NP2500 shows the confirmation for

the connection to the network.

• NP2500 shows the prompt for the connection to the Internet.

2 Select [Yes] to connect to the Internet. »» NP2500 shows the confirmation for

the connection to the Internet.

Note

•• You can enter more than one encryption key. In this case, NP2500 prompts you to select the default encryption key.

Wireless connection with static IP address

This is how to navigate and select with the remote control:

•Press or to select a menu option.

•Press OK to confirm a selection.

•Press BACK to go back to the previous screen.

•Press HOME to go to the Home menu.

The alphanumeric buttons of the remote control are multi-function buttons:

•To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of

NP2500.

•To cycle through the alphanumeric characters that are available, press a button repeatedly.

•To delete the last character entry from the display, press CLEAR.

•To delete the whole last line entry from the display, press and hold

CLEAR.

26EN

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Contact information Issued the certificate Philips Consumer Lifestyle HK-0947-NP2500-FR 2008Contents Technical data CleaningSafety Information for Europe Know these safety symbolsHearing Safety Listen at a moderate volume Splashing water, rain or high humidityEnvironmental notices Battery disposal informationInformation about the use of batteries Cannot be disposed of with normal household waste Your NP2500 OverviewRear view Top viewVOL Remote controlRate Page Prepare Install remote control batteriesPosition NP2500 Connect Connect AC powerConnect sound system You can select from the following status options Status Eco standbyView the demo First-time setupFirst-time connection to home network Clear NP2500NP2500 shows the prompt for the connection to the Internet Connection to the Internet First-time setupWireless connection with static IP addressManually First-time setupWired connection with automatic IP address 16 EN Adjust volume PlayShuffle play Repeat playInstall Media Browser software Configure a PC to share music and picturesConfigure a MAC to share music and pictures Alphanumeric searchQuick jump navigation SuperScroll / Scroll at high speedAlphanumeric buttons of the remote Button once or more to select a characterPlay preset Internet radio stations Save Internet radio stations to presetsInternet radio Listen to Internet radioRemove a Favorite Station Listen to Favorite StationsManually add Internet radio stations Listen to My Media HomeSettings Play modeSound settings Equalizer settingsSlideshow settings Display settingsClock settings Clicker soundAlarm settings Network settingsWireless connection with automatic IP address Wireless network connection with automatic IP addressWireless connection with static IP address »» NP2500 shows the prompt for Connection to the Internet Wired connection with automatic IP addressSelect Yes to connect to the Internet Wired connection with static IP address »» Press Back to go back to the previous screen Control are multi-function buttonsNP2500 To cycle through the alphanumeric Display, press Clear To delete the whole last line entryCheck for SW upgrades InformationUnregister NP2500 Registration informationDemo mode Restore factory settingsCall center numbers Legal informationMaintenance CleaningThis chapter tells you how to care for NP2500 Clean NP2500 only with a soft dry clothTechnical data Supported audio file formats Supplied accessoriesSupported picture file formats Troubleshooting Possible reasonsGlossary AmplifierCBR constant bit rate CD Compact DiscDhcp M4A MHz Mega Hertz One million cycles per second Mono monauralPBC PINVBR variable bit rate WAVWMA Windows Media Audio WPA / WPA2 Wi-Fi Protected AccessWPS Contact information PhilipsStreamium terms and conditions Changes in Features Software END User License Agreement Page Page Credits GNU General Public License Page Page Page Page Page Page GNU Lesser General Public License Page Page Page Page Page Page USA Koninklijke Philips Electronics N.V

HK-0947-NP2500-FR specifications

The Philips HK-0947-NP2500-FR is a striking, high-performance audio system that combines advanced technology with elegant design to deliver an unmatched sound experience. Known for its versatility and innovative features, this audio system is designed for discerning listeners who demand the best.

One of the standout features of the HK-0947 is its powerful sound output, which is achieved through advanced audio processing technologies. With its formidable amplifier and premium speaker drivers, the system provides rich, immersive sound that fills any space. Whether you are playing music, watching movies, or gaming, the audio experience is remarkably dynamic and crystal clear.

The HK-0947-NP2500-FR also incorporates Bluetooth connectivity, allowing users to easily stream audio from their smartphones, tablets, or other Bluetooth-enabled devices. This feature enhances convenience, enabling users to enjoy their favorite playlists without the hassle of wired connections. Furthermore, the system supports multiple audio formats, ensuring compatibility with a wide range of media.

Another significant characteristic of this audio system is its sleek and modern design. The nickel-plated accents and high-quality finish not only make the HK-0947 aesthetically pleasing but also enhance durability. The intuitive interface features easy-to-use controls, making it accessible for users of all ages.

Moreover, the HK-0947-NP2500-FR is equipped with cutting-edge sound enhancement technologies, such as equalizers and presets, allowing users to customize their listening experience. Whether you prefer deep bass for an energizing workout or crisp treble for a relaxing night in, these options bolster the system's versatility.

In addition to connectivity options and sound quality, the HK-0947 considers energy efficiency, featuring a low standby power consumption that benefits both your wallet and the environment.

Overall, the Philips HK-0947-NP2500-FR stands out in the crowded audio market by merging quality sound, user-friendly technology, and stylish design—all while catering to the multifaceted needs of modern consumers. Whether for home entertainment or personal enjoyment, this audio system is engineered to elevate your listening experience to new heights.
Top Page Image Contents