Philips HK-0947-NP2500-FR user manual Wired connection with static IP address

Page 30

advanced configurations that are not described in this manual.

1 Connect an Ethernet cable (sold separately) to the ETHERNET jack of NP2500 and the Ethernet jack of the wired router.

2 Ensure that the wired router is turned on and has broadband Internet access.

3 Turn on NP2500.

4 Press SETTINGS, to go to the Settings menu.

5 Select [Wired (Ethernet)] to start the network setup process.

»» NP2500 acquires the automatic IP address.

»» NP2500 shows the confirmation for the connection to the network.

»» NP2500 shows the prompt for the connection to the Internet.

6 Select [Yes] to connect to the Internet. »» NP2500 shows the confirmation for

the connection to the Internet.

Wired connection with static IP address

This is how to navigate and select with the remote control:

•Press or to select a menu option.

•Press OK to confirm a selection.

•Press BACK to go back to the previous screen.

•Press HOME to go to the Home menu.

The alphanumeric buttons of the remote control are multi-function buttons:

•To select a number or an alphanumeric character, press a button once or repeatedly until you see the number or alphabetic character in the display of

NP2500.

•To cycle through the alphanumeric characters that are available, press a button repeatedly.

•To delete the last character entry from the display, press CLEAR.

•To delete the whole last line entry from the display, press and hold

CLEAR.

The onscreen display guides you through the process of connecting

NP2500 to your home network and the Internet. This section describes the typical wired setup with static

IP address. You can also follow the onscreen prompts for advanced configurations that are not described in this manual.

1Connect an Ethernet cable (sold separately) to the ETHERNET jack of NP2500 and the Ethernet jack of the wired router.

2Ensure that the wired router is turned on and has broadband Internet access.

3Turn on NP2500.

4Press SETTINGS, to go to the Settings menu.

5Select [Wired (Ethernet)] to start the network setup process.

»» NP2500 tries to acquire an automatic

IP address.

»» Press BACK to enter your IP address manually.

6Enter your static IP address and confirm. »» NP2500 shows the confirmation for the connection to the network.

»» NP2500 shows the prompt for the connection to the Internet.

7Select [Yes] to connect to the Internet. »» NP2500 shows the confirmation for the connection to the Internet.

28EN

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Contact information Issued the certificate Philips Consumer Lifestyle HK-0947-NP2500-FR 2008Contents Technical data CleaningHearing Safety Listen at a moderate volume SafetyInformation for Europe Know these safety symbols Splashing water, rain or high humidityBattery disposal information Environmental noticesInformation about the use of batteries Cannot be disposed of with normal household waste Rear view Your NP2500Overview Top viewRemote control VOLRate Page Install remote control batteries PreparePosition NP2500 Connect AC power ConnectConnect sound system You can select from the following status options Status Eco standbyFirst-time setup View the demoFirst-time connection to home network NP2500 ClearNP2500 shows the prompt for the connection to the Internet First-time setupWireless connection with static IP address Connection to the InternetManually First-time setupWired connection with automatic IP address 16 EN Shuffle play Adjust volumePlay Repeat playConfigure a MAC to share music and pictures Install Media Browser softwareConfigure a PC to share music and pictures Alphanumeric searchAlphanumeric buttons of the remote Quick jump navigationSuperScroll / Scroll at high speed Button once or more to select a characterInternet radio Play preset Internet radio stationsSave Internet radio stations to presets Listen to Internet radioListen to Favorite Stations Remove a Favorite StationManually add Internet radio stations Listen to My Media HomeSound settings SettingsPlay mode Equalizer settingsClock settings Slideshow settingsDisplay settings Clicker soundWireless connection with automatic IP address Alarm settingsNetwork settings Wireless network connection with automatic IP addressWireless connection with static IP address Wired connection with automatic IP address »» NP2500 shows the prompt for Connection to the InternetSelect Yes to connect to the Internet Wired connection with static IP address NP2500 To cycle through the alphanumeric »» Press Back to go back to the previous screenControl are multi-function buttons Display, press Clear To delete the whole last line entryUnregister NP2500 Check for SW upgradesInformation Registration informationCall center numbers Demo modeRestore factory settings Legal informationThis chapter tells you how to care for NP2500 MaintenanceCleaning Clean NP2500 only with a soft dry clothTechnical data Supplied accessories Supported audio file formatsSupported picture file formats Troubleshooting Possible reasonsCBR constant bit rate GlossaryAmplifier CD Compact DiscDhcp M4A MHz Mega Hertz One million cycles per second Mono monauralPBC PINVBR variable bit rate WAVWPA / WPA2 Wi-Fi Protected Access WMA Windows Media AudioWPS Contact information PhilipsStreamium terms and conditions Changes in Features Software END User License Agreement Page Page Credits GNU General Public License Page Page Page Page Page Page GNU Lesser General Public License Page Page Page Page Page Page USA Koninklijke Philips Electronics N.V

HK-0947-NP2500-FR specifications

The Philips HK-0947-NP2500-FR is a striking, high-performance audio system that combines advanced technology with elegant design to deliver an unmatched sound experience. Known for its versatility and innovative features, this audio system is designed for discerning listeners who demand the best.

One of the standout features of the HK-0947 is its powerful sound output, which is achieved through advanced audio processing technologies. With its formidable amplifier and premium speaker drivers, the system provides rich, immersive sound that fills any space. Whether you are playing music, watching movies, or gaming, the audio experience is remarkably dynamic and crystal clear.

The HK-0947-NP2500-FR also incorporates Bluetooth connectivity, allowing users to easily stream audio from their smartphones, tablets, or other Bluetooth-enabled devices. This feature enhances convenience, enabling users to enjoy their favorite playlists without the hassle of wired connections. Furthermore, the system supports multiple audio formats, ensuring compatibility with a wide range of media.

Another significant characteristic of this audio system is its sleek and modern design. The nickel-plated accents and high-quality finish not only make the HK-0947 aesthetically pleasing but also enhance durability. The intuitive interface features easy-to-use controls, making it accessible for users of all ages.

Moreover, the HK-0947-NP2500-FR is equipped with cutting-edge sound enhancement technologies, such as equalizers and presets, allowing users to customize their listening experience. Whether you prefer deep bass for an energizing workout or crisp treble for a relaxing night in, these options bolster the system's versatility.

In addition to connectivity options and sound quality, the HK-0947 considers energy efficiency, featuring a low standby power consumption that benefits both your wallet and the environment.

Overall, the Philips HK-0947-NP2500-FR stands out in the crowded audio market by merging quality sound, user-friendly technology, and stylish design—all while catering to the multifaceted needs of modern consumers. Whether for home entertainment or personal enjoyment, this audio system is engineered to elevate your listening experience to new heights.
Top Page Image Contents