Firmware Version - This field displays the current firmware version of the Range Extender.
Hardware Version - This field displays the current hardware version of the Range Extender.
Connection Status to Existing Network - This part shows you the current information of the root wireless network which the device is connecting to.
Main Router/AP WiFi Network Name (SSID) - It shows the name of the wireless network which your device is connecting to.
Signal - It shows the root wireless network's signal strength that the device has received.
Connection Status - It shows whether your device has been connected to a wireless network currently. "Connected" means the range extender have connected to a wireless network, while if it shows "disconnected", you can click "connect" to connect.
Network- The following is the information of Wired LAN. You can configure them in the Network page.
Range Extender MAC Address - The physical address of the system, as seen from the Network
Range Extender IP Address - The IP address of the wired LAN.
Subnet Mask - The subnet mask associated with IP address.
Wireless - These are the current wireless settings or information of the device. You can configure them in the Wireless
Operation Mode - Indicates the mode which the device is working on. "Disable" means the wireless radio has been turned off.You can configure it in the Wireless
Range Extender WiFi Network Name (SSID) - The Device's wireless network name (also called SSID) which your PC or other device can be connected to.
Channel - The current wireless channel in use.
Mode - The current wireless mode which the AP works on. Channel Width - The bandwidth of the wireless channel.
Wireless Rate - It shows the current wireless rate between the range extender and your PC or other devices which are connected to the it.
Traffic Statistics - The system traffic statistics.
Sent (Bytes) - Traffic that counted in bytes has been sent out from wireless. Sent (Packets) - Traffic that counted in packets has been sent out from wireless. Received (Bytes) - Traffic that counted in bytes has been received from wireless. Received (Packets) - Traffic that counted in packets has been received from wireless.
System Up Time - The length of the time since the device was last powered on or reset. Click the Refresh button to get the latest status and settings of the device.
11