TP-Link TL-WA860RE manual Wireless, Dhcp Client List

Page 23

TL-WA860RE

300Mbps WiFi Range Extender with Power Outlet Pass-through

Address Lease Time - Enter the amount of time for the PC to connect to the Range Extender with its current assigned dynamic IP address. The time is measured in minutes. After the time is up, the PC will be automatically assigned a new dynamic IP address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.

Default Gateway (optional) - Enter the IP address of the gateway for your LAN. The factory default setting is 0.0.0.0.

Default Domain (optional) - Enter the domain name of your DHCP server. You can leave the field blank.

Primary DNS (optional) - Enter the DNS IP address provided by your ISP. Consult your ISP if you don’t know the DNS value. The factory default setting is 0.0.0.0.

Secondary DNS (optional) - Enter the IP address of another DNS server if your ISP provides two DNS servers. The factory default setting is 0.0.0.0.

Click Save to save the changes.

Note:

To use the DHCP server function of the device, you should configure all computers in the LAN as "Obtain an IP Address automatically" mode. This function will not take effect until the device reboots.

4.4.3 DHCP Client List

Selecting Network > DHCP Client List will enable you to view the Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 4-11).

Figure 4-11 DHCP Clients List

ID – It displays the index of the DHCP client.

Client Name – The Client Name displays the name of the DHCP client.

MAC Address – The MAC Address displays the MAC address of the DHCP client.

Assigned IP – The Assigned IP displays the IP address that the Range Extender has allocated to the DHCP client.

Lease Time - It displays the time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically.

You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button.

4.5Wireless

The Wireless option, improving functionality and performance for wireless network, can help you make the Range Extender an ideal solution for your wireless network. Here you can create a

16

Image 23
Contents TL-WA860RE 300Mbps WiFi Range Extender with Power Outlet Pass-throughCopyright & Trademarks CE Mark Warning Korea Warning Statements Safety Information Yang Hongliang Product Manager of International Business Declaration of ConformityContents Conventions Package ContentsAppearance Main FeaturesIntroduction Product Overview LED Explanation Name Status Indication Before You Begin Hardware InstallationBasic Requirements Connecting the DeviceLogin Windows Quick Installation GuideQuick Setup Start Quick Setup Available Wireless Networks Quick Setup Review Settings Status Configure the DeviceProfile Quick SetupClick Add in the Profile list page as shown in Figure To add a profile1 LAN NetworkDhcp Settings TL-WA860RE Dhcp Client List Wireless12 Wireless menu Wireless SettingsWireless Security TL-WA860RE  Note Wireless MAC FilteringTo modify or delete an existing entry To set up an entry, follow these instructions17 Wireless Advanced Wireless AdvancedWireless Statistics Throughput Monitor System Tools Firmware UpgradeTo upgrade the devices firmware, follow these instructions Factory DefaultsBackup & Restore Reboot System Log PasswordPage Wireless Appendix a Factory DefaultsDefault Value Common Default SettingsT2. What can I do if I forget my password? Appendix B TroubleshootingPage Physical and Environment Appendix C SpecificationsGeneral Appendix D Glossary