TL-WA860RE
300Mbps WiFi Range Extender with Power Outlet
Figure 4-8 DHCP Settings – Auto
Figure 4-9 DHCP Settings – On
Figure 4-10 DHCP Settings – Off
DHCP Server - Selecting the radio button before Auto/On/Off will disable/enable the DHCP server on your Range Extender. The default setting is Auto. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer.
Start IP Address - This field specifies the first address in the IP Address pool. 192.168.0.100 is the default start IP address.
End IP Address - This field specifies the last address in the IP Address pool. 192.168.0.199 is the default end IP address.
15