TL-WA860RE
300Mbps WiFi Range Extender with Power Outlet
Operation Mode - Shows the current Operation Mode.
Transmit Power - Specifies the transmit power of the device. You can select High, Middle or Low which you would like. High is the default setting and is recommended.
Beacon Interval - Specifies a value between
RTS Threshold - Specifies the RTS (Request to Send) Threshold. If the packet is larger than the specified RTS Threshold size, the device will send RTS frames to a particular receiving station and negotiate the sending of a data frame. The default value is 2346.
Fragmentation Threshold - This value is the maximum size determining whether packets will be fragmented. Setting the Fragmentation Threshold too low may result in poor network performance since excessive packets. 2346 is the default setting and is recommended.
DTIM Interval - Determines the interval of the Delivery Traffic Indication Message (DTIM). You can specify the value between
Enable WMM - WMM function can guarantee the packets with high- priority messages being transmitted preferentially. It is strongly recommended enabled.
Enable Short GI - This function is recommended for it will increase the data capacity by reducing the guard interval time.
Enable AP Isolation - Isolates all connected wireless stations so that wireless stations cannot access each other through WLAN.
4.5.5 Wireless Statistics
Selecting Wireless > Wireless Statistics will allow you to see the wireless transmission information in the following screen shown in Figure
Figure 4-18 Statistics of the device attached wireless stations
Operation Mode - Shows the current operation mode.
MAC Address - Shows the connected wireless station's MAC address.
23