TP-Link TL-WR642G manual

TL-WR642G

108M Wireless Router User Guide

Figure 4-6 WAN - PPPoE

¾User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.

¾Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates.

Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications is visiting the Internet continually in the background.

¾Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button.

¾Time-based Connecting - You can configure the router to make it connect or disconnect based on time. Enter the start time in HH:MM format for connecting and end time in HH:MM format for disconnecting in the Period of Time fields.

)Note:

Only when you have configured the system time on System Tools -> Time page, will the Time-based Connecting function can take effect.

¾Connect Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the router will disconnect from the Internet connection, and you will not be able to re-establish your connection automatically as

19