![](/images/new-backgrounds/1168893/16889397x1.webp)
TL-WR642G
108M Wireless Router User Guide
request.
5.Select the protocol used for Incoming Ports Range from the
6.Select the Enable checkbox to enable.
7.Click the Save button to save the new rule.
Figure 4-28 Add or Modify a Triggering Entry
There are many popular applications in the Popular Application list. You can select it, and the application will fill in the Trigger Port, incoming Ports Range boxes and select the Enable checkbox. It has the same effect as adding a new rule.
To modify or delete an existing entry:
1.Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.
2.Modify the information.
3.Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
)Note:
1)When the trigger connection is released, the according opening ports will be closed.
2)Each rule allowed to be used only by one host on LAN synchronously. The trigger connection of other hosts on LAN will be refused.
3)Incoming Port Range cannot overlap each other.
4.7.3 DMZ
The DMZ host feature allows one local host to be exposed to the Internet for a
42