TP-Link TL-WR642G manual Address Reservation, To Reserve IP addresses

TL-WR642G

108M Wireless Router User Guide

4.6.3 Address Reservation

When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings. This page is used for address reservation (shown in Figure 4-22).

Figure 4-22 Address Reservation

¾MAC Address - The MAC address of the PC of which you want to reserve IP address.

¾Assigned IP Address - The IP address of the router reserved.

¾Status - The status of this entry either Enabled or Disabled.

To Reserve IP addresses:

1.Click the Add New button. (Pop-up Figure 4-23)

2.Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and IP address in dotted-decimal notation of the computer you wish to add.

3.Click the Save button when finished.

Figure 4-23 Add or Modify an Address Reservation Entry

To modify or delete an existing entry:

1.Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.

2.Modify the information.

3.Click the Save button.

Click the Enable All button to make all entries enabled

Click the Disabled All button to make all entries disabled.

38