TP-Link TL-SG2424 manual Related Document About this Installation Guide, Audience, Conventions

Page 3

Related Document

The User Guide and CLI Reference Guide (CLI Reference Guide is not available for TL-SG2452\ of the product are provided on the resource CD. To obtain the latest product information, please visit the official website: http://www.tp-link.com

About this Installation Guide

This Installation Guide describes the hardware characteristics, installation methods and the points that should be attended to during installation. This Installation Guide is structured as follows:

Chapter 1 Introduction. This chapter describes the external components of the Switch.

Chapter 2 Installation. This chapter illustrates how to install the Switch.

Chapter 3 Lightning Protection. This chapter illustrates how to prevent lightning damage.

Chapter 4 Connection. This chapter illustrates how to do the physical connec- tion of the Switch.

Chapter 5 Configuration. This chapter instructs you to configure the Switch via Web Interface and CLI commands.

Appendix A Troubleshooting.

Appendix B Hardware Specifications.

Appendix C Technical Support.

Audience

This Installation Guide is for:

Network Engineer

Network Administrator

Conventions

Due to the similarity in structure of the Gigabit Smart Switch series, in this Installation Guide we take TL-SG2216 as an example to illustrate Chapter 2 Installation, Chapter 3 Lightning Protection, Chapter 4 Connection and Chapter 5 Configuration.

This Guide uses the specific formats to highlight special messages. The following table lists the notice icons that are used throughout this guide.

Remind to be careful. A caution indicates a potential which may result in device damage.

Remind to take notice. The note contains the helpful information for a better use of the product.

Related Document

 

II

 

 

Image 3
Contents Installation Guide CE Mark Warning Copyright & Trademarks FCC StatementRelated Document About this Installation Guide AudienceConventions Contents Front Panel Cccccccccc IntroductionProduct Overview AppearanceReset Front panel of TL-SG2424P is shown as the following figure LED Mode Switch Button Rear Panel Grounding Terminal CCCCCCCCCCInstallation Package ContentsSafety Precautions Site Requirements Temperature/HumidityLightning Protection Installation ToolsProduct Installation Desktop InstallationRack Installation Fffffffffff Rack Installation Cccccccccc Lightning Protection Cabling ReasonablyRequirements for Cabling Outdoors Requirements for Cabling Indoors Connect to Ground Connecting to the Grounding BarEquipotential Bonding Connecting to the Ground via the Power SupplyUse Lightning Arrester Fffffffffff Lighting Arrester Connection CCCCCCCCCCConnection Ethernet PortSFP Port Verify Installation Power OnInitialization Configure the Switch via GUI CCCCCCCCCCConfigurationConfigure the Switch Using CLI Can be made by using CLI Qqqq Why does the Power LED work abnormally? Appendix a TroubleshootingAppendix B Hardware Specifications Appendix C Technical Support Technical Support Page Mail support@tp-link.com 7106504146 Rev
Related manuals
Manual 28 pages 6.79 Kb