Polycom se200 manual Electrical Safety Precautions

Page 10

ReadiManager SE200 Getting Started Guide

Electrical Safety Precautions

To ensure electrical safety, follow these guidelines:

Find the power switch for the appliance, and the room's emergency power-off switch, disconnection switch, or electrical outlet. If an electrical accident occurs, shut off power quickly.

Do not work alone when working with high-voltage components.

Use rubber mats that supply electrical insulation.

The power-supply power cords must include a grounding plug. Connect them into grounded electrical outlets only.

Rack-Mount Safety Precautions

To ensure rack-mount safety, follow these guidelines:

Find a good location for the equipment rack. Choose a clean, dust-free, area with good airflow near a grounded power outlet. Avoid areas with high-levels of heat, electrical noise, or electromagnetic discharge.

Fully extend the leveling jacks on the bottom of the rack to the floor, so the full weight of the rack rests on them.

In a single-rack installation, attach stabilizers to the rack.

In multiple-rack installations, couple the racks together.

Make sure the rack is stable before you extend a component from the rack.

You should extend only one component at a time. If you extend two or more components at the same time, the rack can become unstable.

Install the heaviest components on the bottom of the rack first, and then work up.

Use a regulating, un-interruptible power supply (UPS) to protect the system from power surges, voltage spikes, and power failures.

Let the power supply cool before you touch it.

To let the components cool adequately, keep the rack's front door and all panels and components on the systems closed, except during maintenance.

1-4

Polycom, Inc.

Image 10
Contents ReadiManager SE200 Getting Started Guide Trademark Information Contents Electromagnetic Immunity Safety About This Guide Documentation ResourcesPolycom, Inc ReadiManager System Setup Collect Necessary MaterialsComplete the First-Time Setup Worksheet External DatabaseEnsure System Safety My System Factory-Set Value Default Value DescriptionElectrical Safety Precautions Unpack and Install the Hardware Components Identify Appliance Connections and ControlsFront Panel Connect to the ReadiManager SE200 Appliance SE200 HyperTerminal window, press EnterIP address Subnet maskGo to , ReadiManager Software Setup ReadiManager SE200 Getting Started Guide ReadiManager Software Setup Log into the ReadiManager SystemRun the First-time Setup Wizard If necessary, check Auto adjust for Daylight SavingsSelect the Use an external SQL Server database check box Enter the IP address or DNS name of the Ldap server Complete the Setup ReadiManager SE200 Getting Started Guide Electrical ReadiManager System SpecificationsPhysical Environmental Regulatory Compliance