Polycom se200 manual Unpack and Install the Hardware Components

ReadiManager® System Setup

Unpack and Install the Hardware Components

To unpack and install the hardware:

1Examine the ReadiManager SE200 shipping container for damage.

2 Open and review the container packing slips.

3Open the containers and examine the contents. The ReadiManager SE200 package includes these items:

—ReadiManager SE200 appliance

—Power cord

—Rack-mount brackets

—Serial cable

4Also examine the contents for damage.

If you find damage, file a claim with the delivery carrier. Polycom is not responsible for damage sustained during shipment of this product.

5Remove all of the components from their containers.

6To rack-mount the ReadiManager SE200 appliance, use the brackets provided. Follow the “Rack-Mount Safety Precautions” on page 1-4.

Identify Appliance Connections and Controls

The ReadiManager SE200 appliance has front and rear panels.

•The front panel includes two lights to show when the appliance has power and the hard drive is working.

•The rear panel includes the main power switch and connections for power, network, serial ports, and Universal Serial Bus (USB) ports.

Figure 1-1and Figure 1-2 show the location of these controls. Table 1-2 and Table 1-3describe these controls.

Polycom, Inc. 1-5