Polycom DOC2562A manual Click Save & Close, Please wait for system reset message box, click OK

Page 16

33Click Save & Close.

The RMX confirms successful configuration.

34In the Success Message box, click OK.

35In the Reset Confirmation dialog box, click Yes.

36In the Please wait for system reset message box, click OK.

System restart may take up to five minutes.

37Refresh the browser periodically until the Login screen is displayed.

38When the Login screen is displayed, enter your Username and Password and click Login.

On first entry, the default Username and Password are both

POLYCOM.

The RMX Web Client opens. An MCU State indicator displays a progress indicator showing the time remaining until the system start-up is complete.

39Create a new User with Administrator permissions and delete the Default User (POLYCOM). For more information see "User Definition” on page 17.

For system security reasons the system is not fully configured until this step has been performed.

The system is now fully configured and if there are no System Errors, the green RDY LED on the CNTL module (on the RMX’s front panel) turns ON.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents General Safety Precautions PreparationsManagement Network Configuration on the USB Key Unpacking the RMXInstalling the RMX Do not remove the protective caps from LAN3 and LAN4Product Registration and Activation Key Retrieval First Entry Power-upSelect the Product Registration link Connecting to the MCU Configuring the IP Network ServiceField Description Click the Next button Click Next If you selected H.323 only go to Step Field Description An ISDN/PSTN Network Service, go to Step Field Description Field can contain be empty blank or a numeric Click Save & Continue Page Flag Value Please wait for system reset message box, click OK Click Save & CloseTo add a new user to the system User DefinitionTo delete a user from the system Selecting the RMX Web Client Languages To customize the Multilingual SettingConferencing Entities Connecting to a Conference Directly or via Entry Queue MCU Prefix in GatekeeperConference or Entry Queue ID/NameConference Control Using Dtmf Codes ISDN/PSTN Participants
Top Page Image Contents