Polycom DOC2562A manual First Entry Power-up, Product Registration and Activation Key Retrieval

Page 4

—Optional. Connect the Shelf Management cable to the Shelf port.

—Connect the E1/T1 cables to their PRI (1-4)ports (if applicable)

First Entry Power-up

8Insert the USB key with the modified IP addresses in the USB port on the front panel.

9Power the RMX ON.

The parameters in the lan.cfg file are uploaded from the USB key to the RMX’s memory and applied during the power-up sequence. System power-up sequence may take up to five minutes.

During the first-time power-up the red ERR LED on the RMX’s front panel remains ON until both the Management and IP Network Services have been defined.

When the RMX's configuration is completed (including the Management and IP Network Services), and if there are no System Errors, the green RDY LED on the CNTL module (on the RMX’s front panel) turns ON.

10Remove the USB key.

Product Registration and Activation Key Retrieval

Before starting the initial configuration process, register the RMX at the Polycom Resource Center website and download the product activation key file to the computer you will use for the configuration:

1Using a Web browser, connect to http://portal.polycom.com.

2Login with your Email Address and Password or register as a new user.

3Select the Product Registration link.

4Follow the on-screen instructions for Product Registration and Product Activation. (The RMX’s serial number is on a sticker on the back of the unit, if needed.)

5Write down the Product Activation Key number or copy it for later use.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents General Safety Precautions PreparationsManagement Network Configuration on the USB Key Unpacking the RMXInstalling the RMX Do not remove the protective caps from LAN3 and LAN4Product Registration and Activation Key Retrieval First Entry Power-upSelect the Product Registration link Connecting to the MCU Configuring the IP Network ServiceField Description Click the Next button Click Next If you selected H.323 only go to Step Field Description An ISDN/PSTN Network Service, go to Step Field Description Field can contain be empty blank or a numeric Click Save & Continue Page Flag Value Please wait for system reset message box, click OK Click Save & CloseTo add a new user to the system User DefinitionTo delete a user from the system Selecting the RMX Web Client Languages To customize the Multilingual SettingConferencing Entities Connecting to a Conference Directly or via Entry Queue MCU Prefix in GatekeeperConference or Entry Queue ID/NameConference Control Using Dtmf Codes ISDN/PSTN Participants
Top Page Image Contents