Selecting the RMX Web Client Languages

By default, the RMX Web Client interface is displayed only in English. However, the system administrator can choose the languages available for selection on the Login screen.

To customize the Multilingual Setting:

1On the RMX menu, click Setup > Multilingual Setting. The Multilingual Setting dialog box is displayed.

2Place check marks in the boxes of the languages to be available for selection.

3Click OK.

4Log out and Log in for the customization to take effect.

Conferencing Entities

The RMX is shipped with one Entry Queue and four Meeting Rooms:

•Entry Queue DefaultEQ whose ID is 1000, and it is used to access the default Meeting Rooms

•Four Meeting Rooms whose IDs are 1001, 1002, 1003 and 1004.

The default conferencing entities are set to line rate of 384 Kbps, Auto Layout, Polycom Skin and have a default duration of one hour.

The default Entry Queue is also set to Ad Hoc conferencing which allows participants to start new conferences without prior definition by entering a Conference or Meeting Room ID other than those used for the default Meeting Rooms and that is not used by any on going conference currently running on the MCU.

For IP conferencing, these conferencing entities can be used to start new conferences without any additional settings.

However, if ISDN/PSTN endpoints are participating in the conferences an ISDN/PSTN dial-in number must be manually assigned to the Conference, Meeting Room or Entry Queue as the number depends on the dial-in numbers range defined in the ISDN/PSTN Network Service. For more information, see the RMX 1500/2000/4000 Administrator’s Guide, "Modifying the EQ Properties” on page 4-8.