If ISDN/PSTN is installed in your conferencing environment, obtain the following information from your ISDN/PSTN Service Provider:
•Switch Type, Line Coding and Framing, Numbering Plan and Numbering Type
•
If the RMX is connected to the public ISDN Network, an external CSU or similar equipment is needed.
Unpacking the RMX
1When you receive the RMX 2000 packing case, inspect the equipment for damage and verify that the components match the packing slip.
2Open the top cover of the RMX 1500 packing case and make sure that the Installation Accessories kit contains the power cables and a USB Key.
3Remove the top cover, lift the RMX 1500 from the package and place it on a flat surface.
Write down the RMX’s serial number that is on a sticker on the back of the unit. It will be needed for product registration later in the installation process.
Management Network Configuration on the USB Key
The system is shipped with the following default IP addresses:
•Control unit IP address – 192.168.1.254
•Shelf Management IP Address – 192.168.1.252
•Control unit subnet mask – 255.255.255.0
•Default Router IP Address – 192.168.1.1
2