Polycom DOC2559B manual Component Description

Page 31

Polycom RMX 4000 Hardware Guide

Table 1-8Polycom RMX 4000 Component Description (Continued)

Component

Description

 

 

AC/DC Power

The AC Power Supply drawers are located below the

Supply Modules

MPM+/MPMx Cards and are connected to the backplane

 

by means of a power connector. Operating at 100-240

 

volts AC 50/60 Hz all power supplies have built-in load

 

sharing capabilities.

 

On systems with DC current, the Power Rail Module

 

(PRM) provides direct current to the rear of the RMX

 

through the backplane.

 

 

Fan Drawer

Eight fans are mounted sideways and stacked in a

 

drawer. The drawer is connected to the Back-plane by a

 

connector.

 

Airflow is from right to left, and out the side of the MCU.

 

Each time a board temperature sensor passes one of its

 

thresholds an event is sent to the ShelfManager,

 

whereupon an threshold alert is posted on the RMX

 

Manager, and increases the fans speed. There are

 

currently 3 sets of thresholds: Normal, Major and Critical.

 

When the temperature reaches a critical threshold (and

 

the fan’s speed increase did not resolve the issue), the

 

controller of the relevant board initiates a shut down.

 

 

Multi Processor

The MPM+ cards, perform the various RTP, audio and

Module+ (MPM+)

video processing functions on the RMX 4000 unit. TI

Card

C6455 processors are at the core of each MPM+ card

 

which are available in the following assemblies:

 

MPM+20 (20 CIF resources)

 

MPM+40 (40 CIF resources)

 

MPM+80 (80 CIF resources)

 

Note: An MPM+ located (on the front panel) must face

 

opposite (same slot level) an RTM LAN card (installed on

 

the rear panel). For more information, see "RTM LAN” on

 

page 1-31.

 

 

1-25

Image 31
Contents Polycom RMX 4000 Hardware Guide USA Συμμορφωνεται Προσ ΤΙΣ Ουσιωδεισ Απαιτησεισ ΚΑΙ ΤΙΣ Russian Communication Certificate Regulatory NoticesTable of Contents Component Replacement Hardware Description Media Protocols Power SupplyPower Consumption PhysicalConferencing Capacities RMX 4000 System CapacitiesEnvironment System Functions MPM+ Mode MPMx Mode MPMx Card Resource Capacities per Card AssemblyMPM+ Card MPM+ Resource Capacities per Card Type MPM, MPM+ and MPMxCard Configuration Mode Selection During Startup / Restart MCU Card Configuration Mode GuidelinesMPMx and MPM+ Modes Site Safety Requirements Safety RequirementsRack Mount Safety Precautions General Installation PrecautionsUnpacking the RMX Installing the RMXPolycom RMX 4000 Hardware Guide Standalone RMX 4000 Installation Installing the RMX in a Rack or as a StandaloneRack Mount Preparations Placing the RMX 4000 in a 19 Rack 2Installing chassis runners and RMX in a rack3RMX 4000 Rack Mount 4Removing and attaching 19 and 23 brackets Placing the RMX 4000 in a 23 RackTo reverse mount the RMX 4000 on a 19 rack Reverse Mounting the RMX 4000 in a RackConnecting the RMX 4000 to Power Sources Connecting the RMX 4000 to AC Power Connecting the RMX 4000 to -48DC Selv Power Type a Type B Types of DC Circuit Breakers installed on the RMXTo connect the cables AC and DC systems RTM-IP Connecting Cables on the RMXFirst-time Power-up RMX 4000 Front Panel RMX 4000 ComponentsShows the front panel of an RMX 4000 DC system Component Description Component Description 9RMX 4000 AC Rear View RMX 4000 Rear Panel10RMX 4000 DC Rear View RTM-IPFollowing items appear on the RMX 4000 rear panel Standby button Toggle between CPU activation and standby RTM IsdnISDN/PSTN Clock Source RTM LANSlot ID/No Card/Component Requirement AC Power Entry Module PEMDC Power Rail Module Component Slot AllocationRTM ISDN/RTM Component RMX 4000 Front Panel LEDsLED Color Description Card Insertion Initiated If during Card removal Initiated The cardCntl 4000 Unit RTM-IP RMX 4000 Rear Panel LEDsLED Color Description Name Function Name RTM LANRTM Isdn Hardware Description Component Replacement Component Replacement Handle Using the Modified PMC Compatible Ejector LeverReplacing the Cntl 4000 Module Replacing an AC Power Supply Module Replacing an AC Power Entry Module PEM Replacing a DC Power Rail Module PRM Component Replacement Carefully slide the Fan drawer out through the front panel Replacing the Fan DrawerInserting an Air Filter Optional in the Fan Drawer Removing the MPM+/MPMx Card from the MCU Replacing an Faulty MPM+/MPMx CardComponent Replacement Installing the Replacement MPM+/MPMx Card Replacing the RTM Isdn Card Installing an MPM+/MPMx Card on the RMXPRI Cables Replacing the RTM-IP Replacing the RTM LAN Replacing the Fabric Switch Module FSM Polycom RMX 4000 Hardware Guide

DOC2559B specifications

The Polycom DOC2559B is a sophisticated conference phone designed to elevate the audio communication experience in various business environments. Renowned for its cutting-edge technology and user-centric features, the DOC2559B is equipped to handle the demands of modern workplaces.

One of the standout features of the DOC2559B is its HD Voice technology, which captures and delivers crystal-clear, high-definition audio. This ensures that conversations are rich and natural, enabling participants to engage more effectively, even in large meeting rooms. The advanced microphone array and full-duplex audio capabilities allow multiple speakers to be heard clearly without cutting off or compromising sound quality.

Another notable characteristic of the DOC2559B is its ability to connect to a wide range of devices. It supports both wired and wireless connections, accommodating local and remote calls through various platforms, including VoIP and traditional phone lines. The integration with cloud-based communication systems is seamless, further enhancing its versatility. Users can easily pair mobile devices through Bluetooth, facilitating conference calls directly from smartphones without needing additional hardware.

The design of the DOC2559B is functional yet elegant, featuring a user-friendly interface that makes operation intuitive. Its large, backlit LCD display provides clear visibility of relevant information such as caller ID, dialed numbers, and call status, making it easy for users to manage calls effectively. The unit is also programmable, allowing organizations to customize speed dial options for frequently contacted numbers, thus streamlining communication processes.

Durability and reliability are key attributes of the Polycom DOC2559B. Built with high-quality materials, it is designed to withstand the rigors of everyday use in a busy office environment. The device is also energy-efficient, helping companies reduce their carbon footprint while maintaining optimal performance.

Moreover, the DOC2559B boasts advanced security features, ensuring that sensitive conversations remain confidential. With encryption options and secure transmission protocols, it protects against unauthorized access and eavesdropping.

In summary, the Polycom DOC2559B is a powerful conference phone that combines high-fidelity audio, robust connectivity options, user-friendly features, and enhanced security. It is an excellent choice for businesses looking to improve their communication capabilities and foster collaboration in an increasingly digital workspace.