Polycom DOC2559B manual AC Power Entry Module PEM, DC Power Rail Module, Component Slot Allocation

Page 38

Chapter 1- Hardware Description

AC Power Entry Module (PEM)

An AC PEM includes a power inlet, EMI filter and backplane connectors. Power input to the system is fed via a PEM (Power Entry Module) through backplane into the power supply. Each AC power module has its own dedicated power cable. The ON/OFF switch on the rear of the RMX activates any power module installed on the RMX. An AC system has three AC PEMs, one for each power module. On failure, both AC power supplies and PEMs are hot swappable.

DC Power Rail Module

A DC power rail module includes a power inlet, circuit breaker, EMI filter and backplane connectors. Power input to the system is fed via a power rail through backplane into the power supply. Each DC power rail has its own dedicated power cable. The circuit switch on the rear of the RMX activates independently any power rail installed on the RMX. An DC system has two DC rails, one for each power rail. On failure, a DC power rail is field replaceable and the RMX must be switched OFF from the two circuit switches and the mains.

Component Slot Allocation

On the RMX™ 4000, components have been assigned dedicated slots as

defined in Table 1-10. Slot numbers are located on both the front and rear of the RMX™ 4000.

Table 1-10RMX™ 4000 Slot Numbering

Slot ID/No.

Card/Component

Requirement

 

 

 

1-4

MPM+/MPMx

Mandatory: At least 1 MPM+/MPMxcard

 

Cards

is required. Each media card also

 

 

requires either an RTM ISDN or an RTM

 

 

LAN card.

 

 

 

5

Fabric Switch

Mandatory

 

Module (FSM

 

 

4000)

 

 

 

 

6

CPU 2

Not Available (NA)

 

 

 

1-32

Image 38
Contents Polycom RMX 4000 Hardware Guide USA Συμμορφωνεται Προσ ΤΙΣ Ουσιωδεισ Απαιτησεισ ΚΑΙ ΤΙΣ Regulatory Notices Russian Communication CertificateTable of Contents Component Replacement Hardware Description Physical Power SupplyPower Consumption Media ProtocolsEnvironment RMX 4000 System CapacitiesConferencing Capacities System Functions MPM+ Mode MPMx Mode MPM+ Card Resource Capacities per Card AssemblyMPMx Card Resource Capacities per Card Type MPM, MPM+ and MPMx MPM+MPMx and MPM+ Modes MCU Card Configuration Mode GuidelinesCard Configuration Mode Selection During Startup / Restart Safety Requirements Site Safety RequirementsGeneral Installation Precautions Rack Mount Safety PrecautionsInstalling the RMX Unpacking the RMXPolycom RMX 4000 Hardware Guide Rack Mount Preparations Installing the RMX in a Rack or as a StandaloneStandalone RMX 4000 Installation 2Installing chassis runners and RMX in a rack Placing the RMX 4000 in a 19 Rack3RMX 4000 Rack Mount Placing the RMX 4000 in a 23 Rack 4Removing and attaching 19 and 23 bracketsReverse Mounting the RMX 4000 in a Rack To reverse mount the RMX 4000 on a 19 rackConnecting the RMX 4000 to Power Sources Connecting the RMX 4000 to AC Power Connecting the RMX 4000 to -48DC Selv Power Types of DC Circuit Breakers installed on the RMX Type a Type BConnecting Cables on the RMX To connect the cables AC and DC systems RTM-IPFirst-time Power-up RMX 4000 Components RMX 4000 Front PanelShows the front panel of an RMX 4000 DC system Component Description Component Description RMX 4000 Rear Panel 9RMX 4000 AC Rear ViewRTM-IP 10RMX 4000 DC Rear ViewFollowing items appear on the RMX 4000 rear panel RTM Isdn Standby button Toggle between CPU activation and standbyRTM LAN ISDN/PSTN Clock SourceComponent Slot Allocation AC Power Entry Module PEMDC Power Rail Module Slot ID/No Card/Component RequirementRTM ISDN/RTM LED Color Description RMX 4000 Front Panel LEDsComponent Card removal Initiated The card Card Insertion Initiated If duringCntl 4000 Unit LED Color Description Name RMX 4000 Rear Panel LEDsRTM-IP RTM LAN Function NameRTM Isdn Hardware Description Component Replacement Component Replacement Using the Modified PMC Compatible Ejector Lever HandleReplacing the Cntl 4000 Module Replacing an AC Power Supply Module Replacing an AC Power Entry Module PEM Replacing a DC Power Rail Module PRM Component Replacement Replacing the Fan Drawer Carefully slide the Fan drawer out through the front panelInserting an Air Filter Optional in the Fan Drawer Replacing an Faulty MPM+/MPMx Card Removing the MPM+/MPMx Card from the MCUComponent Replacement Installing the Replacement MPM+/MPMx Card Installing an MPM+/MPMx Card on the RMX Replacing the RTM Isdn CardPRI Cables Replacing the RTM-IP Replacing the RTM LAN Replacing the Fabric Switch Module FSM Polycom RMX 4000 Hardware Guide

DOC2559B specifications

The Polycom DOC2559B is a sophisticated conference phone designed to elevate the audio communication experience in various business environments. Renowned for its cutting-edge technology and user-centric features, the DOC2559B is equipped to handle the demands of modern workplaces.

One of the standout features of the DOC2559B is its HD Voice technology, which captures and delivers crystal-clear, high-definition audio. This ensures that conversations are rich and natural, enabling participants to engage more effectively, even in large meeting rooms. The advanced microphone array and full-duplex audio capabilities allow multiple speakers to be heard clearly without cutting off or compromising sound quality.

Another notable characteristic of the DOC2559B is its ability to connect to a wide range of devices. It supports both wired and wireless connections, accommodating local and remote calls through various platforms, including VoIP and traditional phone lines. The integration with cloud-based communication systems is seamless, further enhancing its versatility. Users can easily pair mobile devices through Bluetooth, facilitating conference calls directly from smartphones without needing additional hardware.

The design of the DOC2559B is functional yet elegant, featuring a user-friendly interface that makes operation intuitive. Its large, backlit LCD display provides clear visibility of relevant information such as caller ID, dialed numbers, and call status, making it easy for users to manage calls effectively. The unit is also programmable, allowing organizations to customize speed dial options for frequently contacted numbers, thus streamlining communication processes.

Durability and reliability are key attributes of the Polycom DOC2559B. Built with high-quality materials, it is designed to withstand the rigors of everyday use in a busy office environment. The device is also energy-efficient, helping companies reduce their carbon footprint while maintaining optimal performance.

Moreover, the DOC2559B boasts advanced security features, ensuring that sensitive conversations remain confidential. With encryption options and secure transmission protocols, it protects against unauthorized access and eavesdropping.

In summary, the Polycom DOC2559B is a powerful conference phone that combines high-fidelity audio, robust connectivity options, user-friendly features, and enhanced security. It is an excellent choice for businesses looking to improve their communication capabilities and foster collaboration in an increasingly digital workspace.