Polycom KIRK ISDN Debugging and how to Make a Trace, EEprom Key Param, Default and preset setting

Page 11
10. EEprom Key Param.

10. EEprom Key Param.

This setting defines if it should be possible to transfer key information during connect. Normally this should be possible to be able to use phone banking and other dial-inn services. Under normal operations it does not cause any problems enabling both DTMF and Keypad information.

11. Default and preset setting.

In the administration software it is possible to preset all the features and setting. Select the Advanced menu and select the Load settings menu. Select the wanted group of settings and press activate.

2.5Debugging and how to Make a Trace

Making traces is useful when debugging the system in cases where there is incompatibility between the ISDN IWU card and a PBX.

In the Administration software it is possible to select a Protocol debug tab. Under normal operation all setting in this tab should be disabled.

1. How to generate a normal trace.

In situations where it is necessary to collect and send a trace to KIRKtelecom for closer investigation. It would normally require that HOST, CLO and PP trace information are enabled.

When this is done in the Protocol debug tab go to the Debug menu and select Start Log To File. Enter the name and path for the file to receive the trace information. Now try to do

14129600-HD, Ed.008/ Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents User Guide Polycom KIRK ISDN Interface CardSoftware 1. IntroductionDocumentation DocumentsThe PBX/Network must be set to Master whit Layer2 CRC check turned on 2. Setting up the KIRK ISDN Interface Card2.1 Changing Impedance of the KIRK ISDN Interface Card 2 Under Options, click Preferences Preparing the KIRK Wireless Server 1500 for Use5 In the Advanced Options tab, select the Allow Subscription checkbox 8 In the Advanced Options tab, click Restart System 2.2 Setting up the connection Configuring the ISDN IWU2 Click Filesetup connection 2.3 Uploading new flash software to the ISDN IWU cardCall forward no reply 2.4 Changing parameters and using feature1. Call forward and Call forward reply timer Call forward when Busy5. R-Key ON/OFF 2. how to activate call forward3. How to deactivate call forward 4. Call Waiting ON/OFF10. EEprom Key Param 2.5 Debugging and how to Make a Trace11. Default and preset setting 1. How to generate a normal trace14129600-HD, Ed.008/ Page
Top Page Image Contents