1. Introduction
As alternative to the analogue interface to the PBX from the KIRK telecom solutions, the interface can now be digital according to the ISDN standard.
Note: For more information about the PBX setup, please contact your local PBX installer.
The 2 Mbps KIRK ISDN Interface Card performs a 32 channel digital interface. An advantage of using ISDN interface is that an ISDN interface provides signal speech channel concentration, leading to a much better usage of the interface capacity. One single card is sufficient to serve the entire installation.
A KIRK Wireless Server 1500 equipped with a single KIRK ISDN Interface Card handles up to 350 handsets. When linking two KIRK Wireless Servers the maximum capacity of the system will be increased to 700 handsets.
The KIRK ISDN Interface Card has been successfully tested in connection with different brands of PBX's. The protocols available are QSIG ver.3.0 and NET5. Please see the white list on our website.
Note: Handling of the KIRK Wireless Server with the KIRK ISDN Interface Card can only be done from the Administration Program version 8.09 or higher. The system also needs a 28 digit pin code which you can get from KIRK telecom Sales Support.
Documentation
The KIRK ISDN Interface Card is preloaded with the QSIG ver.3.0 or NET5 protocol. The following documents and software are available for download.
Documents
•KIRK ISDN Interface Card Installation Guide
•KIRK ISDN Interface Card User’s Guide (this document)
http://www.kirktelecom.com/company/suk169.asp
Software
•QSIG protocol (1410 2500)
•QSIG protocol (1410 9800) for use with SAMSUNG PBX
•NET5 protocol (1405 6515)
•KIRK Wireless Server Flash Code (1330 0180).KTB
•Administration Software for ISDN IWU
•Administration Software for KIRK Wireless Server 1500 version 8.04 or higher
Click here to download software.