Polycom KIRK ISDN Uploading new flash software to the ISDN IWU card, Click Filesetup connection

Page 8

2Click File>setup connection.

2Click File>setup connection.

Click Disconnect and Select the correct comport. Click Connect and Close.

Note the “Receive – success” message on the status bar.

2.3Uploading new flash software to the ISDN IWU card.

3Click Advanced and select Load Flash. An Flashload dialog box appears.

4Click Start and select the file to be downloaded and click open.

5The download starts shortly after ant takes 4 to 5 minutes. The entire KWS1500 needs to be restarted after the download.

14129600-HD, Ed.008/ Page 8

Image 8

Contents Polycom KIRK ISDN Interface Card User Guide1. Introduction DocumentationDocuments SoftwareThe PBX/Network must be set to Master whit Layer2 CRC check turned on 2. Setting up the KIRK ISDN Interface Card2.1 Changing Impedance of the KIRK ISDN Interface Card Preparing the KIRK Wireless Server 1500 for Use 2 Under Options, click Preferences5 In the Advanced Options tab, select the Allow Subscription checkbox 8 In the Advanced Options tab, click Restart System Configuring the ISDN IWU 2.2 Setting up the connection2.3 Uploading new flash software to the ISDN IWU card 2 Click Filesetup connection2.4 Changing parameters and using feature 1. Call forward and Call forward reply timerCall forward when Busy Call forward no reply2. how to activate call forward 3. How to deactivate call forward4. Call Waiting ON/OFF 5. R-Key ON/OFF2.5 Debugging and how to Make a Trace 11. Default and preset setting1. How to generate a normal trace 10. EEprom Key Param14129600-HD, Ed.008/ Page