Polycom KIRK ISDN manual Configuring the ISDN IWU, Setting up the connection

Page 7

Configuring the ISDN IWU.

To change setting or upgrade the protocol software you use the administration software for the ISDN IWU. If not already installed, download the software from www.kirktelecom.com.

2.2Setting up the connection

1Connect the PC to the KIRK ISDN Interface Card (J5), and start the administration software.

If a symbol is shown at each information in the main window and the status bar says “Receive – error”. It indicates that the administration software is not able to get the current setting from the ISDN IWU card. In this case please make sure that the correct cable is used, proper inserted and the correct comport is selected.

14129600-HD, Ed.008/ Page 7

Image 7

Contents User Guide Polycom KIRK ISDN Interface CardSoftware 1. IntroductionDocumentation Documents2.1 Changing Impedance of the KIRK ISDN Interface Card 2. Setting up the KIRK ISDN Interface CardThe PBX/Network must be set to Master whit Layer2 CRC check turned on 2 Under Options, click Preferences Preparing the KIRK Wireless Server 1500 for Use5 In the Advanced Options tab, select the Allow Subscription checkbox 8 In the Advanced Options tab, click Restart System 2.2 Setting up the connection Configuring the ISDN IWU2 Click Filesetup connection 2.3 Uploading new flash software to the ISDN IWU cardCall forward no reply 2.4 Changing parameters and using feature1. Call forward and Call forward reply timer Call forward when Busy5. R-Key ON/OFF 2. how to activate call forward3. How to deactivate call forward 4. Call Waiting ON/OFF10. EEprom Key Param 2.5 Debugging and how to Make a Trace11. Default and preset setting 1. How to generate a normal trace14129600-HD, Ed.008/ Page