TP-Link TL-WA890EA manual Detail Explanation, Indication

Figure 1-2

Detail Explanation:

Item

Status

Indication

Button

Press the button for 1 - 2 seconds to enable WPS function.

Press the button for 5 - 8 seconds to reset TL-WA890EA.

WPS/RESET

LED

When the WPS LED keeps blinking, TL-WA890EA is connecting

to the root device; then the WPS LED will be solid for 5 minutes

and then turn off, after the connection succeeds.

Ports (1-4）

To connect the client(s) to TL-WA890EA with Ethernet cable(s).

The LAN LED(s) will turn on when the corresponding port(s) is

LAN

connected to a client.

LEDs (1-4）

The LAN LED(s) will keep blinking when there is data transferring.

The LAN LED(s) will turn off when the corresponding port(s) is

disconnected.

USB

Port

To connect TL-WA890EA to the power adapter with an USB cable.

When the powered-on device isn’t connected or fails in connection,

System

LED

the System LED will light orange.

When the device is connected successfully, the system LED will

light blue.

Table 1-1