4.4.2 Wireless Settings
Selecting Advanced > Wireless Settings will enable you to configure the basic settings for your wireless network on the screen below (Figure
Figure 4-9 Wireless Settings
Main Router/AP Wi-Fi Network Name - The name of the wirless network this device is going to connect to.
MAC Address of Main Router/AP - The physical MAC address of the Main Router/AP this device is going to connect to.
Band - The wireless band that the root access point or wireless router is working in.
Wireless Security Type - The wireless security type of the existing wireless network.
Encryption - The encryption of the existing wireless network. It is used when the wireless security type is WPA-PSK or WPA2-PSK.
WEP Index - The WEP index is only used when the wireless security type is WEP (ASCII) or WEP (Hexadecimal).
WEP Auth Type - The authorization type of WEP. It is only used when the wireless security type is WEP (ASCII) or WEP (Hexadecimal).
Wireless Password - The wireless password of the existing wireless network. If the Wireless Security Type is WPA-PSK or WPA2-PSK, the length of this field should be between 8 and 63 characters which are case-sensitive. If the Wireless Security Type is WEP (ASCII), the length should be 5 or 13 characters. If the Wireless Security Type is WEP (Hexadecimal), the length should be 10 or 26 digits.
4.4.3 Wireless Advanced
Selecting Advanced > Wireless Advanced will allow you to do some advanced settings for the device in the following screen shown in Figure
14