TP-Link TL-WA890EA Universal Dual Band WiFi Entertainment Adapter Setup Guide

TL-WA890EAN600 Universal Dual Band WiFi Entertainment Adapter with 4 Ports

Main Router/AP Wi-Fi Network Name - It shows the name of the wireless network your device has connected to, also called SSID.

MAC Address of Main Router/AP - It shows the physical MAC address of the Main Router/AP your device has connected to, also called BSSID.

Channel - The wireless channel in current use.

Signal - It shows the strength of the root wireless network signal that the device has received.

Band - The wireless band that this device is working in.

MAC Address - The physical address of the device, as seen from the Advanced -> LAN page.

Wired - As follows is the information of Wired LAN. You can configure them in the Advanced -> LAN page.

MAC Address - The physical address of the device, as seen from the Advanced -> LAN page.

IP Address - The LAN IP address of the device.

Subnet Mask - The subnet mask associated with LAN IP address.

System Up Time - The duration since the device was powered on or reset.

Click the Refresh button to get the latest status and settings of the device.

4.2Quick Setup

Please refer to Chapter 3 Quick Installation Guide.

4.3WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This section will guide you to add a new wireless device to an existing network quickly by WPS function. The WPS function can be configured on the page as shown in Figure 4-2.

Figure 4-2 WPS

WPS Status - To enable or disable the WPS function here.

If the root device (a wireless router or an access point) supports WPS and is equipped with a WPS button, the following 3 methods are all available. While if the root device supports WPS but doesn't have a WPS button, only the 3rd one is available.

Method 1:

1) Push the WPS button on the root device.