TP-Link TL-PA4020P manual Upgrade Firmware

Page 24

TL-PA4020PAV500 2-port Powerline Adapter with AC Pass Through

4.4.1 Upgrade Firmware

Click the Upgrade Firmware button to upgrade the version of the firmware for the adapter and the following dialog will pop up.

z

z

NVM: None-volatile memory. It is used for upgrading the firmware.

PIB: Parameter Information Block. It contains configuration values that establish device network identity, general capabilities and operational modes.

If you want to upgrade the version of firmware for the device, please select appropriate Firmware and PIB files together. New firmware versions and PIB files are posted at www.tp-link.com and can be downloaded for free.

18

Image 24

Contents REV1.0.0 1910010946 Copyright & Trademarks FCC Statement Safety Information Declaration of Conformity Yang Hongliang Product Manager of International BusinessContents Package Contents ConventionsImportant Safety Instructions IntroductionSystem Requirement LED Indicator Status IndicationPhysical Interface Interface DescriptionPage Connecting Mechanism IntroductionConnection Instruction Hardware Connection Computer Hardware Connection Internet Installing Management Utility Page Page Page Using the Management Utility StatusNetwork Set Local Device’s Network NameRename the Remote Device/Enter Password Add Device Advanced SystemUpgrade Firmware To upgrade the devices firmware, follow these instructions Reset DeviceSet All Devices’ Network Name Advanced Feature How to Use the Pair Buttons Set Up a Secured Powerline AV Network with the Pair ButtonCreate a secured Powerline network using the Pair button： Pair Secure with 128 bits-AESJoin an existing secured Powerline AV Network Leave an existing secured Powerline AV NetworkAppendix a Troubleshooting Power LED does not light up. Ans. Check the followingPowerline LED does not light up Ethernet LED does not light up. Ans. Check the following