TP-Link TL-PA4020P manual LED Indicator, Status Indication

Page 9

TL-PA4020PAV500 2-port Powerline Adapter with AC Pass Through

8.Plug this product directly into a wall socket (100V–240V~, 50/60Hz). Do not use an extension cord between this product and the AC power source.

9.When plugging this product into a wall socket, make sure that the electrical socket is not damaged, and that there is no gas leakage.

10.Place the connecting cables properly so that people won’t stumble or walk on it.

11.This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult the qualified technician.

12.Unplug this product from the mains and refer the product to qualified service personnel for the following conditions:

¾If liquid has been spilled on the product

¾If the product has been exposed to rain or water

13.Unplug this product from the wall socket before cleaning. Use a damp cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.

14.The specification of the fuse is T4AL250V. To avoid damage, please do not change the fuse.

15.The Operating temperature is 0~40(32~104).

16.The Storage temperature is -40~70(-40~158).

1.3 LED Indicator

The LED indicator displays information about the device’s status.

Power LED

Powerline LED

Ethernet LED

 

 

 

 

 

 

Item

 

Status

 

Indication

 

 

 

 

 

 

 

 

Solid

The adapter is on.

 

 

 

 

 

 

Power LED

 

Blinking

 

The adapter is in power-saving mode or in pairing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

procedure.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off

 

The adapter is off.

 

 

 

 

 

 

 

 

Solid

The adapter is connected to a powerline network.

 

 

 

 

 

 

Powerline LED

 

Blinking

 

The adapter is transferring data.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off

 

The adapter isn’t connected to any powerline network or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is in power-saving mode.*

 

 

 

 

 

 

 

 

 

 

3

Image 9
Contents REV1.0.0 1910010946 Copyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Declaration of ConformityContents Conventions Package ContentsImportant Safety Instructions IntroductionSystem Requirement Status Indication LED IndicatorInterface Description Physical InterfacePage Connecting Mechanism IntroductionConnection Instruction Hardware Connection Computer Hardware Connection Internet Installing Management Utility Page Page Page Status Using the Management UtilitySet Local Device’s Network Name NetworkRename the Remote Device/Enter Password Add Device System AdvancedUpgrade Firmware To upgrade the devices firmware, follow these instructions Reset DeviceSet All Devices’ Network Name Set Up a Secured Powerline AV Network with the Pair Button Advanced Feature How to Use the Pair ButtonsCreate a secured Powerline network using the Pair button: Pair Secure with 128 bits-AESLeave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkPower LED does not light up. Ans. Check the following Appendix a TroubleshootingPowerline LED does not light up Ethernet LED does not light up. Ans. Check the following