TP-Link TL-PA4020P manual Join an existing secured Powerline AV Network

Page 27

TL-PA4020PAV500 2-port Powerline Adapter with AC Pass Through

Join an existing secured Powerline AV Network:

Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants to join this network.

Step 1. Press and hold the Pair button on Powerline adapter C for one second.

Step 2. Press and hold the Pair button on Powerline adapter A/B for one second. (This step must be taken within 120 seconds after step 1 is finished.)

Step 3. Wait for about 60 seconds while your Powerline adapters are connecting. The Power LED on Powerline adapter A/B and C will stop flashing and become solid light when the connection is made.

)Note:

The sequence of Step 1 and Step 2 can be exchanged.

Leave an existing secured Powerline AV Network:

As the figure above shown, Powerline adapter A, B and C have formed a HomeplugAV Network. The user wants to remove one device (Powerline adapter A) from this network.

Step 1. Press and hold the Pair button on Powerline adapter A for at least 7 seconds. Powerline adapter A will reset and restart. (The Power LED of Powerline adapter A will momentarily extinguish during resetting, flash during restarting then illuminate steadily.)

Step 2. Wait for the reset to complete.

21

Image 27
Contents REV1.0.0 1910010946 Copyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Declaration of ConformityContents Conventions Package ContentsImportant Safety Instructions IntroductionSystem Requirement Status Indication LED IndicatorInterface Description Physical InterfacePage Connecting Mechanism IntroductionConnection Instruction Hardware Connection Computer Hardware Connection Internet Installing Management Utility Page Page Page Status Using the Management UtilitySet Local Device’s Network Name NetworkRename the Remote Device/Enter Password Add Device System AdvancedUpgrade Firmware To upgrade the devices firmware, follow these instructions Reset DeviceSet All Devices’ Network Name Pair Secure with 128 bits-AES Advanced Feature How to Use the Pair ButtonsSet Up a Secured Powerline AV Network with the Pair Button Create a secured Powerline network using the Pair button:Leave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkEthernet LED does not light up. Ans. Check the following Appendix a TroubleshootingPower LED does not light up. Ans. Check the following Powerline LED does not light up