TP-Link manual TD-W8970N Wireless N ADSL2+ Modem Router User Guide

TD-W8970NWireless N ADSL2+ Modem Router User Guide

)Note:

Enabling packet level QoS for PVC improves performance for selected classes of applications. While QoS consumes system resources; therefore the number of PVC(s) will be reduced. Besides this, it cannot be set for the connection type of CBR and Real-time VBR. If you select the QoS service, the Quality of Service menu will be added to the Web-based Utility, the detailed configuration will be described in 4.4.8 Quality of Service.

4.4.1.2 ETH interface

Choose “Advanced Setup”Æ“Layer2 InterfaceÆETH Interface”, you can configure ETH WAN interfaces on the screen below.

Figure 4-4

)Note:

To make sure the ETH port available, you should first choose “Advanced Setup”Æ“LAN Ports” to enable the Virtual LAN Ports feature.

¾Add: Click the Add button, and you can add a new interface in the next screen.

Figure 4-5

¾ETH port: Select an ETH port to configure as the WAN port.

¾Select Connection Mode: Choose a connection mode for the port.

Click Apply/Save to save your settings and then you will see the screen similar to Figure 4-6.

19